Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第54页
1-10 Fast Flexible Placer SM481(L) PLUS Administ r ator’s Guide Once the ‘Operatio n Mode Change’ has been selected, the following dialog box appears. Click the < Change> button. And then the foll owing dialog …
1-9
Operation Mode and Password Change
1.2. Changing Password
Except for the plain users, each user mode has a password. The password is needed to set
each user mode. The password must be set within 8 characters.
Caution Do not share the programmer mode and manager mode
with the users other than the corresponding users. Damage
may be caused by the incorrect operation of the MMI by the
unauthorized user in the programmer mode or manager
mode.
Select the ‘Operation Mode Change’ Button in the menu-toolbar in the System
Manager Mode.
1-10
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
Once the ‘Operation Mode Change’ has been selected, the following dialog box
appears.
Click the <Change> button. And then the following dialog box appears.
Enter the password in the <New Password> edit box.
1-11
Operation Mode and Password Change
Re-enter the password in the <Confirm Password> edit box in order to confirm the set
password.
Then click the <OK> button to apply the change.
1.3. Setting User Login Time
User authorization is automatically changed to ‘Operator’ after the set period of time.
The setup is performed in the following manner.
Select the <Use> check box in the <Authority Limit by time> group.
Input the time to set in the edit box in minutes.
Click the <OK> button.
After the time is set up, the remaining time until the time for the authorization change is
indicated below the shortcut menu of the Tools at the right of the MMI.