Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第29页

Preface xv SM481PLUS (2 Docking Option) 1,625 Height=900mm The mass which d o es n ot include the Docking Cart and Feeder . 1,685 Height=950mm The mass which d o es n ot include the Docking Cart and Feeder . SM481PLUS (1…

100%1 / 566
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
xiv
Mechanical Specifications
Size and mass of the machine
Height (Under the condition that the height of the PCB upper surface is 900 mm)
1: Up to the upper surface of signal light (2,090 mm)
2: Length (1,650 mm)
3: Width (1,680 mm)
4: Up to the upper surface of cover (1,530 mm)
Mass
Type Mass (kg) Remarks
SM481PLUS
(Standard 2 Feeder base)
1,655
Height=900mm
The mass which does not
include the Feeder.
1,715
Height=950mm
The mass which does not
include the Feeder.
Preface
xv
SM481PLUS
(2 Docking Option)
1,625
Height=900mm
The mass which does not
include the Docking Cart
and Feeder.
1,685
Height=950mm
The mass which does not
include the Docking Cart
and Feeder.
SM481PLUS
(1Standard Feeder base
+ 1 Docking Option)
1,635
Height=900mm
The mass which does not
include the Docking Cart
and Feeder.
1,695
Height=950mm
The mass which does not
include the Docking Cart
and Feeder.
SM481PLUS
(Front 1 feeder base)
1,615
Height=900mm
T
he mass which does not
include the Feeder.
1,665
Height=950mm
The mass which does not
include the Feeder.
SM481PLUS
(Front 1 Docking Option)
1,600
Height=900mm
The mass which does not
include the Docking Cart
and Feeder.
1,650
Height=950mm
The mass which does not
include the Docking Cart
and Feeder.
Type Mass (kg) Remarks
Fast Flexible Placer SM481(L) PLUS Administrator’s Guide
xvi
Switching of Operation Panel
Figurei.5 Operation Panel
Switching operation on the operation panel is described below.
Main switch
Has a function of supplying or stopping the main power to the machine. Power is
supplied to a controller by turning the switch. A power lamp is lighted and a working
screen is shown on the programming monitor after a short delay. During the initial
stage, power is not turned on for the drivers such as motor. The power should be
turned off only after terminating the MMI. If the power is suddenly turned off, the data
and the main body may be damaged and the machine malfunction may occur at the
next power up.