Hanwha SM481 PLUS Series Administrator’s Guide Eng.pdf.pdf - 第318页
12-10 Fast Flexible Placer SM481(L) Administrator’s Guide 3) Select the rank of t he LED part. Memo Double clicking the rank colum n of the LED parts will execute the dialog box that can add or delete the rank. For a…
12-9
LED placement
12.3. Feeder and placement point registration
In order to supply LED parts using the Rank function in the feeder registration menu, the
<Rank> option must be set.
Set the Rank option in the following manner:
1) Select the “General” tab dialog box in the “Option Setup” submenu of the “System
Setup” menu. Then select the <Use Rank Check> dialog box.
2) Select the slot to supply LED parts in the “Feeder Registration” menu.
12-10
Fast Flexible Placer SM481(L) Administrator’s Guide
3) Select the rank of the LED part.
Memo Double clicking the rank column of the LED parts will execute the
dialog box that can add or delete the rank.
For an LED part for which rank is set, its rank is indicated along
with the feeder.
4) Select the LED part using the corresponding rank in the part registration menu.
12-11
LED placement
12.4. Optimization
12.4.1. Rank
Arranges feeders automatically for placement points by the rank of the LED according to
the characteristics of the PCB for lighting.
Figure12.3 “Optimizer Setup: Rank” tab dialog box
Refers to the dialog box that allows the user to select the work type according to the
characteristics of the PCB for LED lighting and optimize the feeder arrangement.
Generally, in the case of the PCB for LED lighting, the user must directly designate the
feeder manually for each placement point in one array in order to perform setup for the
feeder by rank.
However, the user does not need to directly perform feeder arrangement for many
placement points by selecting the appropriate type for the work type in this dialog box.
The rank option may be set differently depending on each model.
<Use 1 Rank> group
Refers to the method to work on the PCB using LEDs of the same rank.
Refers to the round lighting board. When working on LEDs of the same rank,
select this type.