Operating Instructions_VF335_en.pdf - 第132页
6|Function description 6.5.1 The [Profile] dialog In this dialog, you can make the following settings: The [Language] frame: ü Set a national language a) Select the desired language by clicking on the appropriate natio…
6|Function description
6.5 The [General settings] editing dialog
This dialog is opened with a click on the button in the top toolbar of the start dialog
and contains the following dialogs
– [Profile]
– [User administration]
– [File path]
– [Logging]
These dialogs can be opened by enabling the respective radio buttons:
Profile
User administration
Logging
File path
General settings
Settings
User maintenance mode
Infeed
Profile
LanguageBackground colour
Infeed unit
Flux unit
Preheating
Preheating
Preheating
Preheating
Preheating
Soldering module
Soldering module
Soldering module
Exit unit
Exit
Default
User ersa Maintenance mode
The [General settings] dialog, here the [Profile] radio button was enabled.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 131/695
6|Function description
6.5.1 The [Profile] dialog
In this dialog, you can make the following settings:
The [Language] frame:
ü Set a national language
a) Select the desired language by clicking on the appropriate national flag.
ü Accept settings, close dialogs
a) Click on
to accept a setting.
b) Click on
to close a dialog.
The [Background colour] frame
For a better overview, each machine module can be provided with a background
colour. The background colours, which are set here, are also used in the editing and
setting dialogs. This improves clarity.
ü Setting the background colour
a) Select the desired module by clicking on it. A colour palette appears.
b) Select the desired background colour by clicking on it and the confirm with
[OK].
NOTE
Factory settings
The [Default] button resets all settings of the [Background colour] frame to the factory
defaults.
ü Accept settings, close dialogs
a) Click on
to accept a setting.
b) Click on
to close a dialog.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 132/695
6|Function description
6.5.2 The [User administration] dialog
You can lock or unlock individual sections of the machine control system for a cer-
tain group of people. To this purpose, the dialog box [User administration] is used.
When the software is started for the first time, the user administration function is
disabled; for this reason, no password is required.
If a password is required when the software is started, a user has already been cre-
ated and provided with administrator rights. Only a user with administrator rights...
– ...may change the [User administration] settings
– ...may create new users
– ...may disable the user administration function
– ...has unrestricted access to all the control settings (except for the configura-
tion ones).
NOTE
Securing data
The user administration data is stored in the [ERSA.usr] file and should be saved on a
data medium. Store the medium in a safe place in order to have the data available in
case of a possible data loss.
The following users are set by default:
– [Service]; password [Service].
– [User]; password [User]
– [Operator]; password [Operator]
CAUTION
Personal injury or material damage due to the machine improper operation!
This data must be changed immediately after the machine commissioning to prevent
unauthorised access to the controller! Keep the user name and password in a safe
place!
NOTE
Pay attention to upper and lower case letters
The [Log in] edit dialog is case-sensitive when a user logs in. If, for example, a user
with the name [User1] was created, an error message is triggered if [user1] is entered.
The same applies to the password entry: if, for example, a password [Administrator]
was created, an error message will be triggered if [administrator] is entered.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 133/695