Operating Instructions_VF335_en.pdf - 第73页
4|Transport, installation, storage, disposal 4.9 Setting up the machine 4.9.1 Clearance space around the machine With open doors and hoods, a 1 metre wide passageway is required in front of and behind the machine. On t…
4|Transport, installation, storage, disposal
4.8 Screw in the adjustable feet.
The adjustable feet are supplied with the machine
ü Screw in the adjustable feet:
a) lift the machine with a forklift and secure the load against falling.
b) Screw in all the adjustable feet.
c) Do not stand or walk under suspended loads.
d) All adjustable feet must be set approximately to the same height.
e) Lower the machine again.
ð The process has now been completed.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 72/695
4|Transport, installation, storage, disposal
4.9 Setting up the machine
4.9.1 Clearance space around the machine
With open doors and hoods, a 1 metre wide passageway is required in front of and
behind the machine. On this regard, please observe the following picture:
Fig.11: Clearance space around the machine
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 73/695
4|Transport, installation, storage, disposal
4.9.2 Footprint area conditions
ü The system can only function properly if the following requirements regarding
footprint and the immediate surroundings have been fulfilled:
a) The footprint must be free of vibration.
b) Avoid the influence of electromagnetic fields!
c) Avoid localized heating or cooling on one side of the machine (e.g. through ra-
diators or drafts).
The footprint must have the following characteristics and be designed for the fol-
lowing loads (base machine):
Weight approx. (kg) 1100
Levelling feet with outfeed support (pcs) 6
Point load per adjusting foot (N/cm
2
) 150
Point load at constant load referred to
the base of the machine (N/cm
2
)
0.34
Maximum unevenness of the footprint
(mm/m
2
)
5
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 74/695