Operating Instructions_VF335_en.pdf - 第446页
9|Spare and wear parts 9.1 Read this first! 9.1.1 Nameplate and machine number Maschinen-Nr./ machine no.: S022A-15G001 6 Max. V orsicherung/max. fuse rating: 3 x 35 A träge/slow Netzanschluss/power supply: 3 /phase/N/…
9|Spare and wear parts
9.9.2.4 DIP soldering module (multiwave) standard wave height measurement ....................654
9.9.2.5 Standard DIP soldering module (multiwave) setup verification...................................656
9.9.2.6 Solder feed with turret bar container (option).............................................................657
9.9.3 DIP_soldering module (multiwave) XL with induction pump .........................................................659
9.9.3.1 DIP soldering module (multiwave) XL extension unit and Z axis ..................................659
9.9.3.2 DIP soldering module (multiwave) XL pressure chamber and solder pot ....................663
9.9.3.3 DIP soldering module (multiwave) XL gassing hood.....................................................667
9.9.3.4 DIP soldering module (multiwave) XL wave height measurement...............................671
9.9.3.5 XL DIP soldering module (multiwave) setup verification..............................................673
9.9.3.6 Solder feed with turret bar container (option).............................................................674
9.10 Spare and wearing part packages ................................................................................................................. 675
9.10.1 Wearing part package 184781........................................................................................................675
9.10.2 Spare part package 184906 ............................................................................................................677
9.10.3 Spare part package 184914 ............................................................................................................679
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 445/695
9|Spare and wear parts
9.1 Read this first!
9.1.1 Nameplate and machine number
Maschinen-Nr./machine no.: S022A-15G0016
Max. Vorsicherung/max. fuse rating: 3 x 35 A
träge/slow
Netzanschluss/power supply: 3 /phase/N/PE
Anschlussdrähte/wire: 5
Schaltschrank IP-Klasse/IP rating control cabinet 21
Absaugmenge/exhaust: 200 m
3
/h
Gewicht/weight 900 kg
Druckluftanschluss/compressed air: opt. min. 6 bar, max. 8 bar
Stickstoffanschluss/nitrogen supply: opt. min. 6 bar, max. 10 bar
ERSA GmbH 97877 WERTHEIM, G
ERMANY
Typ/type: Smartflow 2020
Lötanlage/soldering system
Baujahr/year of manufacture: 07.2015
P
N
: 22 kW U
N
: 230/400 VAC
I
N
: 33,5 kW f
N
: 50 / 60 Hz
Fig.175: Example for the rating
plate of a machine. The details are
not identical with the rating plate
on the machine!
NOTE
Important note
Always state the machine number when ordering spare parts. You will find this num-
ber on the rating plate (see illustration). The rating plate contains further important
information about the machine such as machine type, manufacturing date, electrical
load ratings, notes on compressed air and, if applicable, nitrogen connection, con-
formity symbol and the address of the machine manufacturer.
Spare or wearing part?
The spare and wear parts are listed in table form. The last two columns mark the
parts either as
– wearing part (A) or as
– spare part (B).
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 446/695
9|Spare and wear parts
9.1.2 Target readers, permitted spare parts
WARNING
Machine malfunctioning is possible!
Personal injury or material damage due to the machine inadequate maintenance and
improper operation!
ü Maintenance work must be performed by trained and qualified staff only.
ü Carry out the maintenance and inspection activities recommended in this instruc-
tion manual.
a) First, read the section "Safety instructions"!
b) Comply with the specified maintenance intervals!
c) Inform the operating staff before servicing!
d) Wear suitable protective clothing for all types of work! Also, check personal pro-
tective equipment for cleanliness and functional efficiency! Do not use damaged
protective equipment, replace it with new items!
e) Before servicing, turn off the machine at the main switch, and secure the latter in
the "OFF" position with a padlock.
f) Lock the main control equipment and remove the key!
g) If service is to be carried out on a hot, ready-to-operate machine, this situation is
dealt with separately in this instruction manual.
h) Use spare parts, replacement parts and wear parts exclusively authorized by the
machine manufacturer!
i) Thoroughly clean the machine before starting work!
j) Re-tighten loosened screws after completing service! Install safety devices and
check for their proper operation!
k) Dispose of operating and auxiliary materials, cleaning agents, and replacement
parts properly and in an environmentally-friendly manner!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 447/695