Operating Instructions_VF335_en.pdf - 第293页
8|Service and maintenance WARNING Risk of death or severe injuries due to flammable materials! Fire hazard! ü When performing any operation, observe the following safety rules: a) The machine suction system must be swi…
8|Service and maintenance
8.2 Read this first!
8.2.1 Nationally valid safety and accident prevention regulations
For any work performed on the machine itself or on its electric or pneumatic equip-
ment, locally applicable accident prevention, safety and environmental protection
regulations are to be observed.
8.2.2 Safe system operation
For your own safety, please observe the following notices
– Check the system at least once per shift for apparent damage, defects and
changes!
– In case of visible damage or defects, or if the system operating performance
has changed, turn off the machine, secure the system and notify the respons-
ible person!
– Tools or other objects which are not required for operating the system may
only be stored inside the machine if it has a special device for storing tools!
– Covers and box parts must not be used as storage area!
– Cleaning agents (e.g. liquids, pastes, gases or cloths) must not be stored inside
the machine.
8.2.3 For your safety
DANGER
Dangerous electrical voltage!
Serious injury or death from electric shock!
ü The emergency STOP pushbutton does not disconnect the machine power supply!
Individual parts of the system are energized even if the emergency stop pushbut-
ton has been activated!
a) Do not use the emergency STOP pushbutton to disconnect the machine from
voltage!
b) Always switch the machine off using the main switch.
8.2.4 Service work on the spray fluxer
For all service work on the spray fluxer, please observe the relevant safety regula-
tions. For fire protection, please read the Information on fire protection [
}42]
Chapter.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 292/695
8|Service and maintenance
WARNING
Risk of death or severe injuries due to flammable materials! Fire hazard!
ü When performing any operation, observe the following safety rules:
a) The machine suction system must be switched on!
b) Read the safety data sheets of the flux material manufacturer!
c) Let the preheaters cool down: The temperature of the preheater must be clearly
below the flux material ignition temperature (also called self ignition point)!
d) Before applying the wrist earthing strap, make sure that it works properly!
e) Apply the wrist earthing strap and connect it to the equipotential bonding of the
machine!
f) Fill any removable flux material tanks outside the machine!
g) Remove immediately any spilled flux material and make sure that the room is suf-
ficiently ventilated. Restart the machine only after removing any residues!
CAUTION
Personal injury or material damage due to irritant substances!
The fluxer system is under pressure!
a) Service and maintenance work may only be performed by qualified staff which
has been trained accordingly.
ð When working on the fluxer system:
b) First de-pressurize the system.
CAUTION
Wear protective clothing!
a) Wear a face mask and protective gloves!
8.2.5 Maintenance work at the soldering pot
WARNING
Severe or fatal injury from hot machine! Pot containing molten metal!
ü For any work being carried out, take the following safety precautions:
a) Service and cleaning work on hot pots must always be carried out by trained and
qualified personnel!
b) Create and follow an internal operating procedure for protective clothing!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 293/695
8|Service and maintenance
WARNING
Electromagnetic fields!
Hazardous for people with pacemakers or implanted defibrillators!
a) In the soldering modules of this soldering system an electromagnetic pump is
used. During operation electromagnetic fields occur in the immediate area. Vul-
nerable people need to keep a minimum safe distance of 10 cm from the induc-
tion pump during its operation.
CAUTION
Fine dust may irritate the skin, respiratory tracks and mucous membranes!
Wear suitable protective clothing and use suitable tools!
ü Please observe the following notes:
a) Do not use a household vacuum cleaner! This device should fulfil the M device
classification (or a better one).
b) Switch on the machine suction unit!
c) Wear gloves, respiratory protection and protective glasses!
d) Do not smoke, eat or drink!
e) Dispose of the dusts environmentally compatible!
8.2.6 Before service and maintenance work
CAUTION
Accident risk!
ü Before starting service work:
a) Never carry out activities for which you are not qualified!
b) First read the [Safety instructions] chapter and become familiar with its content!
c) Wear protective equipment!
d) Keep the required tools and supplies ready!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 294/695