Operating Instructions_VF335_en.pdf - 第236页
6|Function description 6.14.6 Entering set values Values are always entered in the input fields of the dialogues via a numerical table. For this reason, this is only explained once. The numerical table is always displa…
6|Function description
Conveyor. When the conveyor is running, this button is displayed in yellow.
6.14.5 In and out module
The settings correspond to those of the infeed/infeed unit. An exception is repres-
ented here by the code reader, which is not available at the outfeed. On this re-
gard, please read chapter Infeed and infeed unit [
}231].
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 235/695
6|Function description
6.14.6 Entering set values
Values are always entered in the input fields of the dialogues via a numerical table.
For this reason, this is only explained once. The numerical table is always displayed
whenever a value is to be entered. You have three options for entering a value:
1. with the mouse: click with the cursor on a digit.
2. With the keyboard: enter values directly via the keyboard.
3. With a Touch Screen Monitor (optional): tap a digit with your finger.
The permissible setting range is specified in each number table. If the permissible
setting range is exceeded or fallen below, the [Min:] / [Max:] setting range is dis-
played in red.
Min:
Max:
Range:
ESC
DEL
CR
Entering values
ü Entering a value using a number table:
a) click on an input field.
ð The number table is displayed.
b) Enter the desired value.
c) Accepting the range: [CR]
ð The number table disappears and the value is accepted in the input field.
d) Deleting the entire range: [C]
e) Deleting the last digit entered: [DEL]
f) Cancelling the operation: [ESC]
ü Accept settings, close dialogs
a) Click on
to accept a setting.
b) Click on
to close a dialog.
NOTE
Why does the number table not appear in all dialogs?
Entering values using a number table is not useful in all dialogs. For example, the entry
of values in data sets, soldering programs or nozzle data tables is always carried out
directly via the keyboard.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 236/695
6|Function description
6.14.7 The input dialog [width adjustment]
In this dialog you can set the conveyor width manually and reference it.
NOTE
Are any changes possible?
The [Set value pages] user rights are required to access this dialog. Settings can only
be displayed if no name and password are logged in. In this case, press the [ESC] key
on your keyboard, or click on the button [Cancel] when a password is required.
ü To open the [Conveyor width adjustment] input dialog:
a) Set the machine to the [Maintenance mode]
b) In the bottom toolbar of the start dialog, click on the
ð The [Conveyor width adjustment] input dialog is displayed:
Conveyor width adjustment
Positioning
Set value Actual value
Set value Actual value
Step mode
Special positions
v
User ersa
Maintenance mode
Fig.59: The input dialog [Width adjustment]
[Step mode]:In this frame, you can manually adjust the conveyor width in the jog
mode.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 237/695