Operating Instructions_VF335_en.pdf - 第204页

6|Function description 6.9.15 Saving soldering programs ü Saving a soldering program: a) Click on the button in the soldering program editor. ð A query dialog is displayed. b) Should the process be cancelled, click on …

6|Function description

Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 203/695

6|Function description

6.9.15 Saving soldering programs

ü Saving a soldering program:

a) Click on the

button in the soldering program editor.

ð A query dialog is displayed.

b) Should the process be cancelled, click on the [no] button.

ð The soldering program is not saved.

c) If the soldering program is to be saved, click on the [yes] button.

ð The soldering program is saved under the name you entered in the [Program

name] input field.

NOTE

When a soldering program is incomplete

When a soldering program contains incomplete or useless entries, they are detected

by the control software. If the soldering program is saved, you receive an error mes-

sage. You can however save the soldering program; the incomplete soldering program

is then marked in the library with the

symbol. You cannot start an incomplete sol-

dering program. The incomplete soldering programs are not displayed in the [Program

selection] dialog.

Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 204/695

6|Function description

6.10 Working with code tables

6.10.1 What are [Code tables]?

This function allows the programme controlled >editing of different, consecutive

components. A code reader at the machine infeed reads the barcode labels on the

PCBs. Depending on the code reader design, standard or 2D codes can be read.

A code table contains data sets which define the assignment of codes to soldering

programmes. Each data set defines the relation of a code to a soldering pro-

gramme. If the read code was assigned to a soldering programme in the code table,

this soldering programme is started. In the [Code table] dialogue, you can create

code tables, fill them with data sets or edit and change existing code tables.

NOTE

Supplementary documents

Please also read the documents in the [Code_Scanner] folder on the data carrier

[product_data_selective], which is included in the delivery.

NOTE

Requirements for automatically soldering with code tables:

ü A board has been placed at the machine infeed

ü The board is provided with a code which has been read correctly

ü The code has been assigned to a soldering program

ü The code reader has been correctly set in the [Code reader] setting dialog. The

[Assignment: code - soldering program] checkbox is active in the [Assignment]

frame.

a) Enable the [Code mode] checkbox.

NOTE

Are any changes possible?

The [Select soldering program] user rights are required to access this dialog. Settings

can only be displayed if no name and password are logged in. In this case, press the

[ESC] key on your keyboard, or click on the button [Cancel] when a password is re-

quired.

Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 205/695