Operating Instructions_VF335_en.pdf - 第140页
6|Function description – [Help]: the whole documentation of the machine is contained in this directory. ü Changing a file path: a) Click on the relevant editing field and specify the path to the new storage loca- tion.…
6|Function description
6.5.7 The [File paths] editing dialog
You can store the following machine data; the appropriate file paths are displayed
in this dialog and can also be changed:
Profile
User administration
Logging
File path
General settings
Settings
User maintenance mode
Code table
Process recorder
User ersa Maintenance mode
Configuration data
Soldering programs
File path
Soldering report
Logging
Traceability
Help
Import ERSAsoft 2.5 ASCII Program files
CAD import/export
Fig.24: The [File paths] editing dialog
– [Soldering programs]: soldering program data is stored in this directory. On this
regard, please read chapter The [Programs] frame.
– [Import ERSAsoft 2.5 ASCII Program files]: the soldering program data, impor-
ted from older series machines, is stored in this directory. On this regard,
please read chapter The [Programs] frame.
– [CAD import/export]: data from the CAD Assistant ERSAcad is stored in this dir-
ectory. On this regard, please read chapter Importing from CAD data [
}199].
– [Code table]: the assignment tables of the barcodes for the soldering programs
are stored in this directory.
– [Configuration data]: the machine configuration files are stored in this direct-
ory.
– [Process recorder]: the data acquired from the process recorders is stored in
this directory. On this regard, please read chapter The process recorder.
– [Soldering report]: soldering report data is stored for process control in this dir-
ectory. On this regard, please read chapter .
– [Logging]: the machine log data is stored in this directory.
– [Traceability]: the traceability system data is stored in this directory.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 139/695
6|Function description
– [Help]: the whole documentation of the machine is contained in this directory.
ü Changing a file path:
a) Click on the relevant editing field and specify the path to the new storage loca-
tion.
ü Accept settings, close dialogs
a) Click on
to accept a setting.
b) Click on
to close a dialog.
NOTE
Regularly back up data!
– After commissioning, first back up data!
– Back up data on a quarterly basis!
– If the control PC is faulty, your data may be unusable. Back up data on an ex-
ternal disk once a year! Data is stored in the [Data storage] folder. With respect
to this, please read chapter [File path]!
– Document each data backup and store it in a safe place!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 140/695
6|Function description
6.5.8 The [Logging] editing dialog
This dialog is used for logging various data of the machine.
Settings
General settings
Profile
User administration
File path
Logging
User ersa
Maintenance mode
File
File
Logging
ERSAsoft
Fig.25: The [Logging] editing dialog
Settings in the [ERSAsoft] frame
You can log visualization software data using the acquired data to perform, for ex-
ample, process analyses in case of production problems.
The [File] editing field
ü To log ERSA data
a) Click on the [File] editing field and enter a name for the log file.
b) Click on the
button.
ð A selection dialog box is displayed.
c) Specify the data to be logged. Enable the relevant check boxes.
ü Accept settings, close dialogs
a) Click on
to accept a setting.
b) Click on
to close a dialog.
ü As soon as the [Logging] editing dialog is displayed again:
a) Accept the setting again by clicking on the
button in the bottom toolbar,
otherwise no change will occur!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 141/695