Operating Instructions_VF335_en.pdf - 第50页
3|For your safety 3.5 Safety instructions for certain machine and system parts 3.5.1 Conveyor system in general WARNING Crushing danger! Risk of injury due to body parts squeezing! a) Do not reach into the machine when…
3|For your safety
3.4.2 Safety instructions for maintenance, service, specific work,
troubleshooting
WARNING
The machine malfunctioning is possible!
Personal injury or property damage due to improper commissioning or incorrect oper-
ation of the machine!
ü Commissioning must be performed by trained and qualified staff only.
a) Inspect the machine for visible defects!
b) Check all safety devices for proper operation!
c) Wear suitable protective clothing for all types of work!
d) During commissioning, ensure switching on and off processes and monitoring dir-
ections are in accordance with the operating instruction manual!
DANGER
Possible serious injury or death!
a) Never disable safety devices!
Be careful when dismounting safety devices!
ü If the removal of safety devices is necessary for the machine service, retrofit-
ting or repairs:
a) re-install all safety devices after work completion!
b) Check all safety devices when assembly has been carried out!
NOTE
Disposal
a) Provide safe and environmentally friendly disposal of packaging materials!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 49/695
3|For your safety
3.5 Safety instructions for certain machine and system parts
3.5.1 Conveyor system in general
WARNING
Crushing danger! Risk of injury due to body parts squeezing!
a) Do not reach into the machine when it is running!
WARNING
Entanglement hazard! Risk of injury due to body parts, clothes or hair being drawn
in!
a) Wear tight-fitting, suitable protective clothing!
b) Button up shirts and jackets! Button up sleeves!
c) For long hair: Wear a hairnet or headgear!
d) Do not wear any scarves, shawls, necklaces and jewellery!
DANGER
Risk of injury due to gloves entrapment!
ü When working on the running conveyor system:
a) Let the machine cool down to room temperature!
b) Do not wear gloves!
c) Keep fingers away from moving parts (transport chains, gear wheels, gear racks)!
d) For the lubrication of the conveyor chains use a brush, a dosage bottle or a spray!
3.5.2 Width adjustment
DANGER
Crushing danger! Risk of injury due to body parts squeezing!
a) During the width adjustment process, do not reach into the machine!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 50/695
3|For your safety
3.5.3 Fluxer in general
DANGER
Severe or fatal injuries from flammable substances!
a) The exhaust air system must be fitted by the machine owner!
b) The required exhaust air volume can be referred to in Chapter [Technical data]!
c) The fluxer unit must not be put into operation before reaching the required
amount of exhaust air!
NOTE
Observe the rules! Risk of fire!
a) Have the fire protection system assessed at the installation site!
b) Take the necessary measures provided for by the applicable laws and regulations!
DANGER
Risk of death or severe injuries due to flammable materials! Fire hazard!
ü When working in the fluxer area:
a) Make sure that the machine suction system is switched on!
DANGER
Severe or fatal injuries from flammable substances! Risk of fire!
a) Service at the fluxer system may only be performed by qualified staff.
b) The fluxer system may not be changed or manipulated in any way.
ð When replacing the spray heads:
c) Only the spray heads intended for this machine may be used.
CAUTION
Personal injury or material damage due to irritant substances!
The fluxer system is under pressure!
a) Service and maintenance work may only be performed by qualified staff which
has been trained accordingly.
ð When working on the fluxer system:
b) First de-pressurize the system.
CAUTION
Wear protective clothing!
a) Wear a face mask and protective gloves!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 51/695