Operating Instructions_VF335_en.pdf - 第18页
1|Introduction 1.2.5 Warnings We use the following pictograms for warnings: WARNING Dangerous electrical voltage! Danger of electrocution! WARNING Hot surfaces, hot gases! Burn hazard! WARNING Laser beam! Risk of retin…

1|Introduction
1.2.4 Prevailing term definitions in this instruction manual
In addition to the pictograms described above, we use the following symbols and
notations:
safety instructions
ü This symbol means: Prerequisite to avert a danger.
a) This symbol means: Measures to avert a danger.
An example:
NOTE
Machine malfunctions caused by improper maintenance!
ü Shorten service intervals, if necessary!
a) Service intervals in this manual refer to single shift operation! They are to be
shortened accordingly for multi-shift operation!
the operating instructions contain:
– references to the measures to be adopted
or
– instructions to be followed by all means.
The operating instructions are structured as follows:
ü this symbol means: prerequisite for the implementation of a measure or
ü aim of a measure.
a) This symbol means: description of a measure.
ð This symbol means: intermediate result.
ð This symbol means: result.
An example: pressure adjustment
ü Remove the cover panel.
a) Adjust the (A) regulator air pressure to 2.5 bar.
ð The symbol on the screen turns green.
b) Reinstall the cover panel.
ð The air pressure has been properly set.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 17/695

1|Introduction
1.2.5 Warnings
We use the following pictograms for warnings:
WARNING
Dangerous electrical voltage! Danger of electrocution!
WARNING
Hot surfaces, hot gases! Burn hazard!
WARNING
Laser beam! Risk of retinal burns!
WARNING
Danger of crushing! Risk of injury due to squeezing of body parts!
WARNING
Suspended load! Risk of injury if the load falls!
WARNING
Inflammable materials! Burn hazard!
WARNING
Corrosive materials! Risk of injury!
WARNING
Entanglement hazard! Risk of injury for body parts, clothing or hair being drawn in!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 18/695

1|Introduction
WARNING
Risk of injury from sharp edges and pointed parts!
WARNING
Severe or fatal injury due to overturning machine!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 19/695