Operating Instructions_VF335_en.pdf - 第408页
8|Service and maintenance Cleaning the solder surface 4 5 5 6 7 1 2 Fig.152: Cleaning the solder surface ü To clean the solder surface: a) Remove any solder dross from the entire solder surface (1) with the solder scr…
8|Service and maintenance
f) If necessary, remove any soiling (oxides, dross) using a silicone brush (4). Re-
move any stuck solder residue with a wooden scraper.
ð The process has now been completed.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 407/695
8|Service and maintenance
Cleaning the solder surface
4
5 5
67
1
2
Fig.152: Cleaning the solder surface
ü To clean the solder surface:
a) Remove any solder dross from the entire solder surface (1) with the solder
scraper (2) or a silicone scraper.
b) Collect the solder dross in a corner of the solder pot.
ð Please note: Work carefully and exerting little pressure to avoid damaging
coated surfaces!
c) Use a perforated scoop (6) to remove the solder dross (7).
ð The process has now been completed.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 408/695
8|Service and maintenance
Skimming solder
DANGER
Severe or fatal injury from hot machine!
The entire machine is hot during operation and contains liquid metal!
a) Service on the hot machine may only be carried out by specially trained staff,
qualified for this type of work! For these types of work, a company internal oper-
ating procedure for protective clothing is to be issued!
b) You should always take into account the possibility for metal to spray out!
c) Special care is required when refilling the pot and working on the pot!
WARNING
Please wear protective clothing!
a) Wear safety shoes, face protection, gloves, protective apron!
b) The protective equipment must be suitable for handling hot objects!
c) Touching the hot solder surface is forbidden even with gloves!
WARNING
Severe or fatal injury from hot machine! Pot containing molten metal!
ü For any work being carried out, take the following safety precautions:
a) Service and cleaning work on hot pots must always be carried out by trained and
qualified personnel!
b) Create and follow an internal operating procedure for protective clothing!
WARNING
When bailing out liquid solder, there is a risk of severe, even lethal injuries!
Skilled personnel shall be involved only!
ü If there is a need to bail out solder from the crucible:
a) Fence the working area with a red and white chain with a warning sign.
b) Remove all obstacles to prevent tripping!
c) Use the bailer from the ERSA cleaning kit only.
d) To drain liquid solder, use suitable containers only.
e) Place suitable containers so that they could not upset, on a heatproof surface
next to the crucible, from which solder needs be bailed out.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 409/695