Operating Instructions_VF335_en.pdf - 第163页
6|Function description b) Follow the instructions on the screen. Click on to close the dialog. Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 163/695
6|Function description
6.8.3 The bottom frame of the [Process recorder] dialog
In this window, you can import and graphically display the production data which
was recorded at an earlier point in time.
User ersa
maintenance mode
Interval
Zoom in
Interval
Zoom in
Fig.33: The [Process recorder] dialog. Depending on your machine equipment, this illustration may differ from the actual display.
Importing and graphically displaying data
ü Import and graphically display data:
a) click on the
button.
ð A selection dialogue is opened.
b) Select a file by double clicking on it.
ð Data is imported.
c) In the left window, select which readings are to be displayed.
ð The readings are displayed graphically.
Zoom function
ü Viewing the graphic in a higher resolution:
a) Click on the [Zoom in] checkbox.
ð The zoom function is enabled.
b) Click with the mouse on the desired section of the graphic and, while pressing
the mouse button, drag over the desired area.
c) Release the mouse button. The selected area is now displayed in an enlarged
way. If required, this process can be repeated several times until the zoom limit
has been reached.
d) Click on the [Zoom in] checkbox again.
ð The checkmark disappears and the graphic is displayed again with its original
resolution.
Printing function
ü To print a graphic
a) Click on the
button in the bottom toolbar.
ð The print dialog box is launched. For the printing process, a previously se-
lected zoom area is also taken into account.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 162/695
6|Function description
b) Follow the instructions on the screen.
Click on
to close the dialog.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 163/695
6|Function description
6.9 The soldering program editor
In the soldering programme editor, you can create libraries where to store solder-
ing programmes. You may create new soldering programmes or edit and modify ex-
isting soldering programmes. You may compile several soldering programmes into
a library in order to increase clarity.
NOTE
Are any changes possible?
The [Edit soldering program] user rights are required access this dialog. Settings can
only be displayed if no name and password are logged in. In this case, press the [ESC]
key on your keyboard, or click on the [Cancel] button when a password is required.
Open the [Soldering program editor] dialogue
ü Opening a dialogue:
a) click on the
button in the top toolbar of the start dialogue.
ð The [Soldering program editor] dialogue is opened:
User ersa
Soldering program editor Settings
Libraries Programs
New New
Copy Copy
Delete Delete
Rename Rename
Import
Edit
Maintenance mode
Fig.34: The [Soldering program editor] dialog
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 164/695