Operating Instructions_VF335_en.pdf - 第69页
4|Transport, installation, storage, disposal 4.5.4 Machine packaged on a pallet ü Unpacking the machine: a) Remove the protective packaging (plastic film). NOTE Disposal a) Provide safe and environmentally friendly dis…
4|Transport, installation, storage, disposal
4.5.3 Machine packaged in a crate
On this regard, please observe the following picture:
1
1
2
1
1 Steel band 2 Cover
ü Unpacking the machine:
a) Remove the steel bands.
b) Remove the cover
c) Remove the side panels.
d) Remove the protective packaging (plastic film).
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 68/695
4|Transport, installation, storage, disposal
4.5.4 Machine packaged on a pallet
ü Unpacking the machine:
a) Remove the protective packaging (plastic film).
NOTE
Disposal
a) Provide safe and environmentally friendly disposal of packaging materials!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 69/695
4|Transport, installation, storage, disposal
4.6 Remove the transport locks
WARNING
Suspended load! Risk of injury if the load falls!
Fig.9: Transport locks
The frame of the machine is bolted to the pallet for transport protection.
ü Removing the transport locks:
a) lift the pallet with the forklift and secure the load against falling.
b) Remove all transport locks.
c) Do not stand or walk under suspended loads.
d) Lower the pallet again.
ð Now the machine can be lifted without the pallet.
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 70/695