Operating Instructions_VF335_en.pdf - 第47页
3|For your safety DANGER Hot supplies, hot excipients, liquid metal! Risk of burns when dealing with fuels, additives and liquid metal! a) Be aware of the in-house provision for protective clothing! b) Work on the hot …
3|For your safety
3.3 Subject-related safety instructions
3.3.1 Handling electrical equipment
DANGER
Dangerous electrical voltage!
Serious injury or death from electric shock!
ü Work on the electrical system or the machine electrical devices must be under-
taken only by a skilled electrician or by properly trained people under the supervi-
sion and guidance of a skilled electrician in accordance with the electro-technical
rules.
a) Shut off the work area with a red and white safety chain and a warning sign.
b) Disconnect all the machine and system parts on which inspections or service and
repair work are carried out.
c) Parts which have been disconnected must first be checked for voltage, then
earthed and short-circuited as well as secured against being switched on again.
Isolate any adjacent live components.
d) Use only original fuses with the specified current rating.
e) Use only voltage insulated tools.
f) In case of faults in the power supply, switch off the system immediately.
3.3.2 Handling pneumatic equipment
CAUTION
Highly pressurized machine parts!
Personal or material damage due to pressurized machine parts or unexpected move-
ment of the mechanism!
ü Work on the machine pneumatic and hydraulic devices may only be carried out by
professionals with the appropriate skills.
a) Read pneumatic and hydraulic plans!
b) System sections and pressure pipes to be opened must be depressurized before
any repair or maintenance work!
3.3.3 Dealing with process materials and substances
CAUTION
Irritating substances!
Personal injury or property damage when dealing with oils, greases, chemicals!
a) Read the rules applicable to the product safety data sheets before use!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 46/695
3|For your safety
DANGER
Hot supplies, hot excipients, liquid metal!
Risk of burns when dealing with fuels, additives and liquid metal!
a) Be aware of the in-house provision for protective clothing!
b) Work on the hot machine must only be carried out by trained and qualified per-
sonnel!
DANGER
Substances hazardous to health!
Risk of poisoning by inhalation or ingestion!
a) Flux fumes are produced during soldering. These are harmful to health. Do not
eat, drink or smoke in places where soldering is carried out!
b) Traces of lead from the soldering adhering to a person's hands may access the hu-
man organism via food or cigarettes (health hazard). After touching solder, clean
your hands thoroughly!
CAUTION
toxic fumes!
Risk of poisoning by inhalation!
a) During soldering, gas emissions arise from the module or from the solder paste
used. These gas emissions are harmful.
b) With respect to respiratory protection, the operator must observe the processing
instructions specified in the safety data sheets of the solder pastes and fluxes
used!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 47/695
3|For your safety
3.4 Safety instructions for certain operating phases
3.4.1 Normal operation
DANGER
Personal injury or material damage due to the machine inadequate service and im-
proper operation!
ü Refrain from any unsafe working methods.
a) Run the machine only if in perfect technical condition!
b) Run the machine only with working protective and safety equipment!
c) Emergency stop devices and sound absorbers must be available and fully func-
tional!
d) The suction equipment must be available and fully functional. The suction equip-
ment must comply with the legal regulations!
WARNING
Entanglement hazard!
a) Before switching on the machine, make sure that nobody can be endangered by
the running machine!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 48/695