Operating Instructions_VF335_en.pdf - 第57页
3|For your safety 3.6 Environmental protection CAUTION Environmentally hazardous substances! a) Do not allow process materials, auxiliary supplies, oils, solders or greases to be disposed of in the soil or the sewage s…
3|For your safety
WARNING
Entanglement hazard! Risk of injury due to body parts, clothes or hair being drawn
in!
a) Wear tight-fitting, suitable protective clothing!
b) Button up shirts and jackets! Button up sleeves!
c) For long hair: Wear a hairnet or headgear!
d) Do not wear any scarves, shawls, necklaces and jewellery!
3.5.6 Laser equipment
Laser radiation! Retinal burn risk.
This machine meets Class2 laser radiation protection requirements. Inside the ma-
chine, laser beams are adequately screened.
However, risks remain!
DANGER
Laser radiation! Retinal burn risk.
a) Never disable protective and safety devices!
b) Never alter or modify the machine without consultations with the manufacturer!
c) Avoid direct eye exposure! Smooth surface can cause reflections!
d) Do not direct the laser beam at others!
3.5.7 Handling of gas pressure springs
CAUTION
Danger of injury due to improper handling of gas pressure springs! Always follow
the manufacturer's instructions!
ü If a gas pressure spring must be replaced:
a) Always have the gas pressure spring replaced by specialised personnel!
b) Always use the provided assembly tool!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 56/695
3|For your safety
3.6 Environmental protection
CAUTION
Environmentally hazardous substances!
a) Do not allow process materials, auxiliary supplies, oils, solders or greases to be
disposed of in the soil or the sewage system!
b) Cleaning agents, cleaning cloths, condensates, dust and contaminated filters must
be disposed of in an environmentally-friendly way.
c) Observe local regulations for waste disposal!
d) Read the safety data sheets of the product manufacturer!
NOTE
Disposal
a) Provide safe and environmentally friendly disposal of packaging materials!
3.7 Retrofitting and changes
Never carry out machine alterations or modifications without consulting
the manufacturer!
Unauthorised alterations or changes are not permitted and exclude any liability of
the manufacturer or supplier for any resulting damage.
WARNING
Personal injury or property damage and environmental damage caused by the ma-
chine defective condition!
ü So, please always make sure that retrofitting or modifying the machine does not
pose any problem:
a) Prior to making any changes to the machine, or altering its parameters, contact
the machine manufacturer!
3.8 Transporting the machine
DANGER
Severe or fatal injury from falling load!
a) Transport operations may only be performed by properly trained and qualified
personnel!
b) Allow the pot to cool to room temperature before carrying out transport opera-
tions!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 57/695
3|For your safety
DANGER
Severe or fatal injuries from flammable substances! Risk of fire!
a) Service and maintenance work may only be performed by qualified staff which
has been trained accordingly.
ð When transporting the machine:
b) Flux-reservoir must be completely emptied before transport.
CAUTION
Danger of being crushed by movement of the axis system during transportation of
the machine!
ü If the machine needs to be transported, secure the axis systems against moving.
a) Inserting transport locks on the axis system
3.9 Transporting the machine with built-in DIP soldering unit
CAUTION
Material damage during transport of the machine with filled DIP soldering unit!
ü If the machine is to be transported:
a) Have the solder be removed from the DIP soldering unit by properly trained staff!
Ersa GmbH Operating Instructions_VF335_en|Rev. 14|30/11/2017 58/695