DECAN_F2_Service(Eng_Ver1).pdf - 第108页

5-8 Fast & Flexible Chip Shooter DECAN F2 Service Manual 5.3. Flying Module 5.3.1. Required Tools  T wrench (other tools supplied) or hex wrench  Gear wrench or torque wrench 5.3.2. Flying IO Boar d Replacement Pro…

5-7

Head

Measure the movement resistance from the 2nd section to the 5th section below

the LM Guide tightening bolts.

14) Once the assembling is completed, turn on the main switch on the front of the machine

and boot the PC.

15) Perform the following calibrations.

Fiducial Cameras Offset Calibration

Camera Offset Calibration

Head Z & R Offset calibration

Total Time: 1Hour

5-8

Fast & Flexible Chip Shooter DECAN F2 Service Manual

5.3. Flying Module

5.3.1. Required Tools

 T wrench (other tools supplied) or hex wrench

 Gear wrench or torque wrench

5.3.2. Flying IO Board Replacement Procedure

1) Manipulate the teaching box to move the head module to the front.

2) Close the PC as usual and turn off the main switch at the front of the machine.

3) Remove the connectors connected to board.

4) Unscrew the fixing bolts(8-M3*6) securing the flying IO board assembly using a hex

wrench and remove it

5-9

Head

5) Remove the connectors connected to camera and Board.

6) Unscrew the fixing bolts(6-M3*5) securing the flying IO board using a hex wrench

and remove it.

7) Replace the Board with a new one.