DECAN_F2_Service(Eng_Ver1).pdf - 第281页

13-11 Software 8) [PRODUCT OPTION] category Presets the default options in the Op tion Setting Page in the Product window Sets the Real Info function provided by the Product Mo nitor Page in the Product window (The RealI…

100%1 / 604
13-10
Fast & Flexible Chip Shooter DECAN F2 Service Manual
6) [SEC] category
7) [PM] category
EditConveyor 0 Displays the UI that can set the
position coordinate (X) and
length of the stations in the MMI
Conveyor Calibration window
0 : Not use
1 : Use
Sys.Setup > Calib. >
Conveyor
Calibration
UseInnerLight 1 Enables/disables the inner
illumination related controls in the
MMI
0 : Disable
1 : Enable
The related UI is
displayed to allow
the adjustment/
setup of the inner
illumination in the
MMI.
Item
Default
Value
Description Remarks
ProdVacChec
k
1 Displays the aggregate data of
the Post Pickup and PrePlace in
the Production Information
window
0 : Not use
1 : Use
Ref. Ref same more
than one Step1:
(Reference) overlap.
If a person is used
Item
Default
Value
Description Remarks
PMM 1 Enables the function for
interlocking between the MMI
PMManager
0 : Disable
1 : Enable
When enabled, this
can run the
PMManager and the
button on which the
alarm function of the
PMManager is
indicated in color is
displayed in the
Utility tab.
Item
Default
Value
Description Remarks
13-11
Software
8) [PRODUCT OPTION] category
Presets the default options in the Option Setting Page in the Product window
Sets the Real Info function provided by the Product Monitor Page in the Product
window
(The RealInfo_Show must be set to 1 and at the same time the function works only at
the Developer level.)
9) [MsgDriverType] category
10) [Gamma] category
PmAutoRun 1 Runs the PMManager
automatically when booting the
MMI
0 : Not use
1 : Use
PmDir C:\Sma
rtSM\bi
n
Folder containing the PMManger
execution file
PmExe PMMan
ager.ex
e
Name of the PMManger
execution file
Item
Default
Value
Description Remarks
MsgDriverIniF
ile
C:\Sma
rtSM\Bi
n\MsgD
riverTyp
e.ini
Name and position of the file in
which the IP and communication
port of the MMI, RT and Vision is
set
Item
Default
Value
Description Remarks
13-12
Fast & Flexible Chip Shooter DECAN F2 Service Manual
11) [Gamma] category
Table13.1 Description of Vision.ini
Item
Default
Value
Description Remarks
Use 0 Communicates with the
Production Management System
(Gamma) of Samsung
Electronics
0 : Not use
1 : Use
Item
Default
Value
Description Remarks
UserSelectCo
nfigure
0 Enables the conveyor
configuration type selection
window when booting the MMI
0 : Not use
1 : Use
Once the MMI
booting is
completed, the
corresponding value
is restored to 0.
AutoConfigure
Change
0 Selects Shuttle-Dual-Shuttle
automatically during MMI booting
regardless of existing conveyor
configuration
0 : Not use
1 : Use
Once the MMI
booting is
completed, the
corresponding value
is restored to 0.
Classification
Item and Default
Value
Description
Remarks
[MACHINE_TYPE] MACHINE=412 Machine Type The machine type
must correspond to
the machine model.