DECAN_F2_Service(Eng_Ver1).pdf - 第386页

15-12 Fast & Flexible Chip Shooter DECAN F2 Service Manual 3) Assemble the Safeguard Override Key to the panel using a switc h assembling jig.

15-11

Electric Device

15.5. Front Power Panel

15.5.1. Required Tools

 Crosshead (Phillips) screwdriver and flathead screwdriver

 T Wrench or Hex Wrench

15.5.2. Part list of Front Power Panel

15.5.3. Front Power Panel Full assembly method

Warning If the main circuit breaker located at the lower left on the

rear side of the machine is not turned off before performing

service, serious injury may occur. Perform servicing with the

power supply to the motor cut off without fail.

1) Assemble the main switch to the panel.

2) Insert the Safeguard Override Key to the panel.

No Part No. Part Name Unit

Quantity

1 J3406005A LOAD SWITCH PI-25 1

2 FC09-003401A BRACKET-FRONT ELEC

PANEL

3 AM03-01079A SAFEGUARD_OV_SW_KE

Y_CABLE_ASSY

SM411-

SC008

4 AM03-010917A CABLE ASSY-

MAIN_SWITCH_TRANS

SM511_PW

005

15-12

Fast & Flexible Chip Shooter DECAN F2 Service Manual

3) Assemble the Safeguard Override Key to the panel using a switch assembling jig.

15-13

Electric Device

4) After connecting the connector as shown in the following figure, arrange the cables

using cable ties.