DECAN_F2_Service(Eng_Ver1).pdf - 第527页
18-7 Machine Calibration 18.1.4. <Fly-Fix Offset> tab dialog Sets the Fly-Fix offset for each head. Data in this dialog box is updated automatically if the Fly to Fix Of fset Calibration is executed du ring camera …
18-6
Fast & Flexible Chip Shooter DECAN F2 Service Manual
<Device> combo box
Select the head.
<Use Compensation> check box
Determines whether to use the R axis compensation method for each head.
<Real Max R> edit box
Indicates the maximum error of the actual value of R axis to its abnormal value.
<Real Min R> edit box
Indicates the minimum error of the actual value of R axis to its abnormal value.
<Err Max> edit box
Indicates the maximum error of the compensation value for the actual value of the
R axis.
<Err Min> edit box
Indicates the minimum error of the compensation value for the actual value of the
R axis.
<Update> button
Transmits the change data to the equipment and closes the dialog box.
<Cancel> button
Ignores the change data and closes the dialog box.
18-7
Machine Calibration
18.1.4. <Fly-Fix Offset> tab dialog
Sets the Fly-Fix offset for each head. Data in this dialog box is updated automatically if the
Fly to Fix Offset Calibration is executed during camera calibration and the result value is
reflected.
Figure18.4 “Fly-Fix Offset” tab dialog
<Device> combo box
Sets the Fly-Fix offset for each head.
<Fly To Fix Offset>
<Degree> column
Sets the Fly-Fix offset by degree at 45 degree interval.
<X, Y> column
Sets the Fly-Fix offset of X, Y.
<Fly Run Out Offset>
<Degree> column
Fly-Fix offset for each angle can be setup at the interval of 45 degrees.
<X, Y> column
Sets the Fly Run Out offset of X, Y.
<Clear data for this Head> button
Deletes Fly-Fix offset data of the selected head. Used when not applying the Fly-Fix
offset on the head. Data cannot be restored once it has been deleted. To apply the Fly-
Fix offset, the camera calibration must be performed again.
<Update> button
18-8
Fast & Flexible Chip Shooter DECAN F2 Service Manual
Transmits the change data to the equipment and closes the dialog box.
<Cancel> button
Ignores the change data and closes the dialog box.
18.1.5. <Mount Offset> tab dialog
Sets the placement offset for each head.
Figure18.5 “Mount Offset” tab dialog
1: Grid group
<Fly Cam, Fix 1 Cam..> option button area
Sets the placement offset for each camera.
<Device> combo box
Sets the placement offset for each head.
<Grid> group
Sets the placement offset by degree at 45 degree interval.
<Degree> column
<Offset-X, Y, R> column
Sets the placement offset of X, Yand R.
<Clear data for this Head> button
Deletes placement offset data of the selected head.
<Clear all data for this Camera> button