DECAN_F2_Service(Eng_Ver1).pdf - 第131页

5-31 Head Ref The part number of the new sensor is J32121021A. 9) When replacing th e motor , continue the foll owing procedure. 10) Unscrew the fixing bolts (M2*6) securi ng Pulley and remove it. Then unscrew the fixing…

5-30

Fast & Flexible Chip Shooter DECAN F2 Service Manual

6) When replacing the timing belt, replace the belt with a new one.

Ref The part number of the new belt is J66021183A.

7) When assembling, refer to the following.

Belt Tension : 409~467Hz

Measurement Position :

8) When replacing the sensor, unscrew the fixing bolts(2-M2*6) securing the sensor and

remove it.

5-31

Head

Ref The part number of the new sensor is J32121021A.

9) When replacing the motor, continue the following procedure.

10) Unscrew the fixing bolts (M2*6) securing Pulley and remove it. Then unscrew the

fixing bolts (4-M2.5*6) securing Motor and remove it.

5-32

Fast & Flexible Chip Shooter DECAN F2 Service Manual

Ref The part number of the new motor is EP08-000007.

11) When assembling, refer to the following.

Assemble the pulley to the motor at 6.1mm intervals.

The pulley tightening torque is 4kgf-cm.

12) Once the assembling is completed, turn on the main switch on the front of the machine

and boot the PC.