DECAN_F2_Service(Eng_Ver1).pdf - 第109页
5-9 Head 5) Remove the connecto rs connected to camera and Board. 6) Unscrew the fixing bolts(6-M 3*5) securing the flying IO b oard using a hex wrench and remove it. 7) Replace the Board with a new one.
5-8
Fast & Flexible Chip Shooter DECAN F2 Service Manual
5.3. Flying Module
5.3.1. Required Tools
T wrench (other tools supplied) or hex wrench
Gear wrench or torque wrench
5.3.2. Flying IO Board Replacement Procedure
1) Manipulate the teaching box to move the head module to the front.
2) Close the PC as usual and turn off the main switch at the front of the machine.
3) Remove the connectors connected to board.
4) Unscrew the fixing bolts(8-M3*6) securing the flying IO board assembly using a hex
wrench and remove it
5-9
Head
5) Remove the connectors connected to camera and Board.
6) Unscrew the fixing bolts(6-M3*5) securing the flying IO board using a hex wrench
and remove it.
7) Replace the Board with a new one.
5-10
Fast & Flexible Chip Shooter DECAN F2 Service Manual
Ref The part number of the new Board is AM06-000358A.
8) Assemble the board in the reverse order of disassembling.
9) Once the assembling is completed, turn on the main switch on the front of the machine
and boot the PC.
10) Perform the following calibrations.
Light Mapping
Total Time : 0.8Hour
5.3.3. Flying Camera Replacement Procedure
1) Manipulate the teaching box to move the head module to the front.
2) Close the PC as usual and turn off the main switch at the front of the machine.
3) Remove the connectors connected to board.
4) Unscrew the fixing bolts(8-M3*6) securing the flying IO board assembly using a hex
wrench and remove it