DECAN_F2_Service(Eng_Ver1).pdf - 第379页

15-5 Electric Device 3) Unscrew the fixing bolts(4 -M5*10) securing the Noise Filter using a wrench and remove it. 4) Assemble in the Base Frame a new Noise Filter . Ref The part number of the new Board is J2901 1001A.

100%1 / 604
15-4
Fast & Flexible Chip Shooter DECAN F2 Service Manual
15.2. Noise Filter
15.2.1. Required Tools
Crosshead (Phillips) screwdriver and flathead screwdriver
T Wrench or Hex Wrench
15.2.2. Noise filter Replacement Procedure
1) Close the PC as usual and turn off the main switch at the front of the machine.
Warning Before servicing the machine, turn off the power switch
located at the front bottom as well as the main circuit
breaker at the rear bottom of the machine. Otherwise,
serious personal injury may occur. Perform servicing with
the power supply to the machine cut off without fail.
2) Remove the right cover.
15-5
Electric Device
3) Unscrew the fixing bolts(4-M5*10) securing the Noise Filter using a wrench and
remove it.
4) Assemble in the Base Frame a new Noise Filter.
Ref The part number of the new Board is J29011001A.
15-6
Fast & Flexible Chip Shooter DECAN F2 Service Manual
15.3. Transformer
15.3.1. Required Tools
Crosshead (Phillips) screwdriver and flathead screwdriver
T Wrench or Hex Wrench
15.3.2. Changing Transformer Input Power Supply Switching Device
1) Close the PC as usual and turn off the main switch at the front of the machine.
Warning Before servicing the machine, turn off the power switch
located at the front bottom as well as the main circuit
breaker at the rear bottom of the machine. Otherwise,
serious personal injury may occur. Perform servicing with
the power supply to the machine cut off without fail.
Warning Be sure to wear anti-electrostatic gloves when servicing the
machine.
2) Check the the power supply voltage at the place where the machine is installed.
Ex) Single phase 220V, Option (Single phase 100, 110,120,220, 230, 240V)