DECAN_F2_Service(Eng_Ver1).pdf - 第150页

在线预览 DECAN_F2_Service(Eng_Ver1).pdf PDF 文档。

Conveyor

6-1

Conveyor

Chapter6. Conveyor

6.1. Conveyor Sensor

6.1.1. Required Tools

 Precision screw driver set (other supplied tools)

 T wrench (other tools supplied) or hex wrench

 Crosshead (Phillips) screwdriver

 Nippers and cable ties

 Calipers

6.1.2. Location of PCB Detected Sensor

1: Entry Sensor

2: Front Conveyor Work Sensor1

3: Front Conveyor Work Sensor2

4: Rear Conveyor Work Sensor1

5: Rear Conveyor Work Sensor2

6: Exit Sensor

7: PCB Out detecting Sensor

6.1.3. PCB Detected Sensor Replacement Procedure

1) Manipulate the teaching box to increase the conveyor width.

2) Close the PC as usual and turn off the main switch at the front of the machine.

3) Remove the connector on the Sensor to be replaced.

4) Unscrew the fixing bolts(2-M3*15) securing the sensor to be replaced and remove it.

5) Replace the Sensor with a new one.