DECAN_F2_Service(Eng_Ver1).pdf - 第421页
17-9 Troubleshooting Replace the SBC board, b ack plane board and CPU. Check the inside of the PC rack to remo ve forei gn materials including dust. Then remove the boards and insert them again. E0602 booting the PC …
17-8
Fast & Flexible Chip Shooter DECAN F2 Service Manual
The board operates abnormally due to an increase in the internal temperature of the PC
rack
Defective PC power supply
The part data is damaged due to a virus infection
Defective back plane board
An I/O communication error occurred due to a damaged system file of the MMI
program
The SBC board and CPU were damaged due to an overheated CPU caused by a
defective CPU cooling fan
A problem occurred to the contacts of the boards due to foreign materials including
dust in the PC rack
[How to Check]
Check whether the PC rack cooling fan operates properly
Check whether the CPU cooling fan operates properly. If it has no problem, replace
the SBC board and check whether the MMI is executed properly
Check for damage to the system file referring to the Windows error information
Check whether the temperature at the site is higher than 24ºC
Check whether the input and output of the PC power supply has any problems
Check for virus infection using an anti-virus program
Replace the back plane board and check whether the MMI is properly executed
Check whether the system file of the MMI program has any problems
After checking whether the CPU cooling fan operates properly, check the SBC board
and CPU for any problems
Check inside the PCB rack and remove foreign materials including dust. Remove the
board and insert them again and then check for the any reoccurrence of the same
problem
[Measures]
Replace the PC rack of the cooling fan.
Replace the CPU cooling fan and SBC board.
Perform HDD recovery and reinstall the MMI.
Remove the dummy slot cover and discharge the heat inside the PC rack. Then reboot
the PC and execute the MMI.
Replace the PC power supply unit.
Delete the part data of the PCB file.
Replace the back plane board.
Reinstall the MMI.
17-9
Troubleshooting
Replace the SBC board, back plane board and CPU.
Check the inside of the PC rack to remove foreign materials including dust. Then
remove the boards and insert them again.
E0602 booting the PC after shutdown, it is repeatedly rebooted
[Cause]
Defective SBC board
Defective PC power supply unit
The Windows system file is damaged
The board operates abnormally due to an increase in the internal temperature of the PC
rack. Defective operation of the control rack cooling fan
The instantaneous power supply is turned on/off due to a problem with the main power
supply unit
[How to Check]
Replace the SBC board and check whether the same problem occurs
Check whether the input and output of the PC power supply has any problems
Perform HDD recovery and reinstall the MMI. Then check whether the same problem
occurs
Check whether the PC rack cooling fan operates properly. If it has no problem, check
that the temperature at the site is higher than 24º
Check whether the main power supply has any problems
[Measures]
Replace the SBC board.
Replace the PC power supply unit.
Perform HDD recovery and reinstall the MMI.
Replace the PC rack cooling fan or check the inside of the PC rack. Remove foreign
materials including dust and remove the boards and then insert them again.
Install an automatic voltage regulator (AVR) to provide a stable power supply.
E0603 The processing speed of the PC is slow with a pause during processing
[Cause]
The installed system and program file are damaged
SBC board is defective or the Windows system file is damaged
The file is opened slowly
Abnormal HDD recognition
Defective SBC board
17-10
Fast & Flexible Chip Shooter DECAN F2 Service Manual
[How to Check]
Perform HDD recovery and reinstall the MMI. Then check whether the same problem
occurs
Replace the SBC board and perform HDD recovery. Reinstall the MMI and check
whether the same problem occurs
Check for virus infection using an anti-virus program
Perform HDD recovery and reinstall the MMI. Then check whether the same problem
occurs
Replace the SBC board and check whether the same problem occurs
[Measures]
Perform HDD recovery and reinstall the MMI.
Replace the SBC board and perform recovery and then reinstall the MMI.
Eliminate the virus using an anti-virus program.
Replace the HDD and perform its recovery and then reinstall the MMI.
Replace the SBC board.
Connect the HDD data cable directly to the SBC board.
E0604 The Initializing Machine I/F error occurred while loading the MMI
[Cause]
Defective SBC board
Microsoft Visual C++ Runtime Library Error
Vision, ZMP and NCIO boards are not properly inserted into the back plane board.
Defective contact of vision, ZMP and NCIO boards.
The MMI system file is damaged due to forced exit
The Base Control board is defective
Abnormal output (24V) of the PC power supply
Defective back plane board
Defective vision board
[How to Check]
Check whether the CPU cooling fan operates properly. If it has no problems, replace
the SBC board and check whether the same problem occurs
Remove the SBC board from the vision board and then insert it again. Remove the
vision, NCIO and ZMP boards from the back plane board slot. Then insert it properly
and check whether the same problem occurs
Check whether a bad sector has occurred through HDD inspection. If it has no
problem, reinstall the MMI and check whether the same problem occurs