DECAN_F2_Service(Eng_Ver1).pdf - 第489页
17-77 Troubleshooting Reassemble and replace the keyboard and mouse. Check and replace the SBC Board. Check and replace the USB cabl e between the SBC a nd OP panel. E0F03 Recognition error of the keyboa rd, mouse …
17-76
Fast & Flexible Chip Shooter DECAN F2 Service Manual
4. Replace the SBC Board.
1. Check whether the MVME Board is defective.
2. Replace the MVME Board.
3. Replace the PMC NVRAM Board.
1. Check the Select Switch LED of the F/R panel (LED On/Off, I/O operation).
2. Check the teaching box operation state.
3. Replace the F/R Operate Board.
4. Replace the SBC Board.
1. 24V power supply of the CAN Conveyor Board.
- Check the input state (LED On)
- Replace the Power Supply #1.
2. Check and replace the CAN Conveyor Board.
1. Check whether the MVME Board is defective.
2. Replace the MVME Board.
3. Replace the PMC NVRAM Board.
[Measures]
Replace the F/R Operate Board.
Replace the teaching box.
Replace the PMC_NVRAM_Board.
Reassemble the F/R Operate Board.
Reassemble the CN28 connector of the CAN Conveyor Board.
Reassemble the NVRAM Board.
E0F02 F/R key board or mouse does not work
[Cause]
Defective contact of the USB cable (PC Rack, Front Cover)
Defective USB cable
Defective keyboard or mouse
Incorrect CMOS USB 2.0 setting
[How to Check]
1. Check the operation state of the F/R keyboard and mouse.
2. Check the CMOS USB setup.
3. Check the power supply and contact state of the external USB port.
[Measures]
17-77
Troubleshooting
Reassemble and replace the keyboard and mouse.
Check and replace the SBC Board.
Check and replace the USB cable between the SBC and OP panel.
E0F03 Recognition error of the keyboard, mouse and USB memory
[Cause]
Many recognition errors occurred since the USB cable is long.
Defective keyboard or mouse
Defective cable contact to the USB port inside the SBC board
[How to Check]
1. Check the operation state of the F/R keyboard and mouse.
2. Check the CMOS USB setup.
3. Check the power supply and contact state of the external USB port.
[Measures]
Reassemble and replace the keyboard and mouse.
Check and replace the SBC board.
Check and replace the USB cable between the SBC and OP Panel.
E0F04 The Motor Free switch of the teaching box is pressed
[Cause]
Defective contact of the teaching box cable connector at the rear of the OP panel
[How to Check]
1. Check the Select Switch LED of the F/R panel (LED On/Off, I/O operation).
2. Check the teaching box operation state.
[Measures]
After checking the phenomenon that the CN26 LED of the Conveyor I/F Board blinks,
reassemble the corresponding part.
E0F05 No response when opening the door
[Cause]
Defective door switch
[How to Check]
1. Check the switch operation in the I/O window.
2. Check the factory constant.
3. Check the state of the Override Key.
4. Check the switch contact.
17-78
Fast & Flexible Chip Shooter DECAN F2 Service Manual
[Measures]
Replace the switch.
E0F06 Read Off when opening the door
[Cause]
Defective door switch
[How to Check]
1. Check the factory constant.
2. Check the state of the Override Key.
3. Check the contact of the Override Key.
[Measures]
Replace the switch.