DECAN_F2_Service(Eng_Ver1).pdf - 第426页

17-14 Fast & Flexible Chip Shooter DECAN F2 Service Manual SW Error When booting the machine, the login p assword input window is displayed. When a password is inputted, the ‘Incorrect Password’ message is indica ted…

17-13

Troubleshooting

17.3.3. SW Error, etc. While Executing the MMI

Cause Description Remarks

SW Error Pause while downloading the MMI E7000

Ram Ring Error E7001

The Assert error occurred while loading the PCB program E7002

Assert[O] error occurred (File. Common.MmiRT Comm.

DPRAM -.Struct.h Line 145)

E7003

The monitor image is turned off intermittently and discolored,

and the screen vibrates

E7004

The optimizer is shut down while running it E7005

An error occurred when executing a command from the

optimizer

E7006

An error occurred when downloading a PCB file after running

the optimizer

E7007

An error occurs where the size of a certain part exceeds the

FOV when running the optimizer

E7008

When running the optimizer, the Download Manager Mode is

disabled

E7009

After running the optimizer, exit the MMI by force E700A

An error occurred when running the optimizer after importing

the Txt file

E700B

Optimizer Error E700D

An error occurred that the front gantry fiducial camera

recognized the fiducial mark of the PCB transferred to the

work station of the rear lane

E700E

Exceeded the bad mark recognition range E700F

The fiducial mark recognition position of the front PCB is

different from that of the rear PCB

E7010

The confirmation window was not displayed when the

fiducial mark recognition error occurred

E7011

Failed to recognize the second PCB fiducial mark E7012

An error occurred when using an array fiducial E7013

The DLL file cannot be found while executing the MMI E7014

When opening a file, even though the file name exists, the

file is not opened

E7015

When opening the PCB file, the PCB file in a certain folder

was not opened

E7016

The buzzer sounds continuously with the MMI being closed

after a message was generated during operation

E7017

17-14

Fast & Flexible Chip Shooter DECAN F2 Service Manual

SW Error When booting the machine, the login password input window

is displayed. When a password is inputted, the ‘Incorrect

Password’ message is indicated and Windows is not booted

E7018

The fiducial mark recognition position of the front PCB is

different from that of the rear PCB

E7019

An error indicating the skip count occurred in the Steps

dialog box

E701A

Failed to pick up 0603 chips simultaneously E701B

The PCB file was not downloaded E701C

Head# Dump Limit Error E701D

An error occurred while dumping the connector E701E

The report is not outputted from the ‘Feeder Info.’ dialog box

of the Utility menu

E701F

The machine pauses with the machine being changed into

the 'Run-Ready' state during

E7020

The machine pauses during production E7021

Limitation occurred when exchanging a PCB file between

machines

E7022

A certain part is dumped even when a pickup error did not

occur

E7023

Timeout occurred during Msgdriver (MMI) communication

(Applicable only to SM series machines excluding the SLM/

SM471 machine)

E7024

Cause Description Remarks

17-15

Troubleshooting

E0700 Pause while downloading the MMI

[Cause]

 The system file was damaged after being infected by a virus

 The SBC board is not properly connected to the vision board connector or the vision

board is not properly inserted into the back plane slot (defective SBC board contact)

 The NCIO board is not properly inserted into the back plane board slot

 A problem occurred with MMI booting due to a damaged MMI system file

 The SBC board, CPU, HDD, etc. are comprehensively defective

 The RT and NCIO boards are not properly inserted into the back plane board slot

 Defective CPU of the SBC board

[How to Check]

 Perform a virus check of the HDD. If it has a problem, perform HDD recovery and

reinstall the MMI. Then check whether the same problem occurs

 Remove the SBC board from the back plane board slot. Then insert it properly and

check whether the same problem occurs

 Remove the SBC board from the vision board connector and insert it again. Then

remove the vision board from the back plane board slot and insert it again properly and

then check whether the same problem occurs continuously

 Check whether the NCIO board is properly inserted into the back plane board slot

 Reinstall the MMI and check whether the same problem occurs

 Replace the SBC board, CPU and HDD in order and check whether the same problem

occurs to them

 Check whether the RT and NCIO boards are properly inserted into the back plane

board slot

 Replace the CPU and check whether the same problem occurs

[Measures]

 Perform HDD recovery and reinstall the MMI.

 Remove the SBC board from the vision board connector and insert it again. Then

remove the vision board from the back plane board slot and insert it again properly.

 Insert the NCIO board into the back plane board slot properly.

 Reinstall the MMI.

 Replace the SBC board, CPU and HDD in order. If the HDD has a problem, perform

HDD recovery after replacing it and reinstall the MMI.

 Insert the RT and NCIO boards into the back plane board slots properly.

 Replace the CPU.