DECAN_F2_Service(Eng_Ver1).pdf - 第183页

7-1 ANC Chapter7. ANC 7.1. ANC 7.1.1. Required Tools  T W rench (other tools supplied) or Hex W rench  T orque W rench 7.1.2. ANC Module R eplacement Procedure 1) Manipulate the teaching box to move th e head assembly …

7-1

ANC

Chapter7. ANC

7.1. ANC

7.1.1. Required Tools

 T Wrench (other tools supplied) or Hex Wrench

 Torque Wrench

7.1.2. ANC Module Replacement Procedure

1) Manipulate the teaching box to move the head assembly to both ends as much as

possible.

2) Unscrew the fixing bolts securing the ANC using a wrench and remove it.

3) Replace the ANC Module with a new one.

Ref The part number of the new ANC Module is AM03-001510A.

7-2

Fast & Flexible Chip Shooter DECAN F2 Service Manual

4) When assembling it with a new ANC Module, refer to the following.

When assembling the ANC, secure a parallelism of 0.02mm between the X Gantry

and ANC.

1. Set the parallelism by attaching the Magnetic Indicator (minimum scale 2?) to

the head tip.

2. If Step #1 above cannot be performed, set the parallelism while watching the

ANC fiducial mark and Vision window using the fiducial camera on the head.