DECAN_F2_Service(Eng_Ver1).pdf - 第534页
18-14 Fast & Flexible Chip Shooter DECAN F2 Service Manual 18.3.1. Axis Home Calibration Sets the limit position of each axis to move. When this button is c licked on, the following dialog box is displayed. Figure18.…
18-13
Machine Calibration
18.3. Calibration [F9]
Only fix camera is activated. Used for setting up the position of the fiducial mark of the fix
camera located at the upper part of ANC.
The following are the works to be performed before performing calibration or those to be
performed in advance.
I/O Test
Mirror offset check and correction
Nozzle check and vacuum check option for system constant
Nozzle check and calibration tool option for system constant : [80] is ‘1’ (default)
ANC type check
Pneumatic system check for any problem
The order in which the calibration is performed and the calibration tool needed to perform
the corresponding calibration is as follows;
Axis Home Calibration
Skew Compensation
Fiducial Camera Scale Calibration - CN400, Calibration Tool
Common X-Y (1st)
Conveyor Calibration
X-XY Compensation – Calibration Bar
Common X-Y (2nd )
Thermal Mapping
Gantry Mapping
ANC Fiducial Mark Teaching
Head & Camera Calibration - CN040, CN400, Light Fly Nozzle, Calibration Tool
Board Position
18-14
Fast & Flexible Chip Shooter DECAN F2 Service Manual
18.3.1. Axis Home Calibration
Sets the limit position of each axis to move. When this button is clicked on, the following
dialog box is displayed.
Figure18.7 “System Axis Limit Info.” dialog box
<Motor Select> list box
Select the motor axis for which to set the limit. Available axes are as follows.
18-15
Machine Calibration
G1F-X: X axis of the front gantry
G1F-Y: Y axis of the front gantry
G1R-X: X axis of the rear gantry
G1R-Y: Y axis of the rear gantry
H1F-Z1: Z axis of head1 of the front gantry
H1F-Z2: Z axis of head2 of the front gantry
H1F-Z3: Z axis of head3 of the front gantry
H1F-Z4: Z axis of head4 of the front gantry
H1F-Z5: Z axis of head5 of the front gantry
H1F-Z6: Z axis of head6 of the front gantry
H1F-Z7: Z axis of head7 of the front gantry
H1F-Z8: Z axis of head8 of the front gantry
H1F-Z9: Z axis of head9 of the front gantry
H1F-Z10: Z axis of head10 of the front gantry
H1F-M1: Mirror axis of the front gantry
H1F-R1: Theta axis (H1, H2) of the front gantry
H1F-R3: Theta axis (H3, H4) of the front gantry
H1F-R5: Theta axis (H5, H6) of the front gantry
H1F-R7: Theta axis (H7, H8) of the front gantry
H1F-R9: Theta axis (H9, H10) of the front gantry
H1R-Z1: Z axis of head1 of the rear gantry
H1R-Z2: Z axis of head2 of the rear gantry
H1R-Z3: Z axis of head3 of the rear gantry
H1R-Z4: Z axis of head4 of the rear gantry
H1R-Z5: Z axis of head5 of the rear gantry
H1R-Z6: Z axis of head6 of the rear gantry
H1R-Z7: Z axis of head7 of the rear gantry
H1R-Z8: Z axis of head8 of the rear gantry
H1R-Z9: Z axis of head9 of the rear gantry
H1R-Z10: Z axis of head10 of the rear gantry
H1R-M1: Mirror axis of the front gantry
H1R-R1: Theta axis (H11, H12) of the front gantry
H1R-R3: Theta axis (H13, H14) of the front gantry
H1R-R5: Theta axis (H15, H16) of the front gantry