DECAN_F2_Service(Eng_Ver1).pdf - 第21页
Preface i Preface This machine has driving units with high-sp eed, devices operated by vacuum pressure, and the power module with high-vo ltage. If the machine is not prop erly operated, the operator could be injured sev…
Preface
i
Preface
This machine has driving units with high-speed, devices operated by vacuum pressure, and
the power module with high-voltage. If the machine is not properly operated, the operator
could be injured severely.
The user here includes personnel involved in installation and repair of standard system
hardware and supply devices such as feeders.
Caution [Before operating this machine]
Before operating this machine, please read this manual and understand its contents.
Please keep this manual near the machine at all times so that it can be referred to as
necessary.
People who have not received training on this machine should not handle it.
Samsung also provides a training program for operating this machine. For details,
please contact the local agent designated by Samsung Techwin Co., Ltd.
To assure safety in the operation and maintenance of the machine, it is very important
for the user to know the location of potential safety hazard. Please refer to “Safety
Precaution” for more information.
Never attempt to modify the equipment without prior consent of Samsung Techwin
Co., Ltd. or repairs it in a manner not stated in this manual.
Samsung Techwin Co., Ltd
(http://www.samsung-smt.com)
E-mail: smtcs@samsung.com
STS Co., Ltd. (The Representative
C/S Company)
388-134, Singal-dong, Giheung-gu,
Yongin-si, Gyeonggi-do, Republic of
Korea (Post Code: 446-598)
Tel: +82-31-281-6900
Fax: +82-31-281-9206
Fast & Flexible Chip Shooter DECAN F2 Service Manual
ii
About Safety
For correct and safe operation of this machine, regulations and instructions related to
safety mentioned in this manual should be always observed.
The basic points to be observed while in operating this machine are as follows.
In order to operate the machine properly and safely, the person who operates this
machine must receive appropriate training.
When performing machine inspection, part replacement, repair or internal setup,
turn off the power supply.
Repair and maintenance of this machine not contained in this manual shall be
performed by the service personnel authorized by Samsung Techwin Co., Ltd. No
repair and maintenance should be done by a customer at his or her discretion.
Unexpected accident may occur
Do not insert a part of a human body (hand, head, etc.) within the range of motion of
the driving part during the operation of this machine. That could lead to
personal injury
When taking measures against an error to minimize the damage after an unexpected
accident occurs, put a hand on the EMG switch of the teaching box to prepare to
stop the machine whenever necessary.
Do not use the machine where inflammable gas is present or contamination is
severe.
Cautions to be exercised for the safety are described as follows in this manual.
Danger If remarks following this symbol are not observed, accidents
involving serious personal injury and death may occur.
Therefore, one must follow the instructions without fail.
Warning If remarks following this symbol are not observed, accidents
involving personal injury may occur. Therefore, one must
follow the instructions without fail