DECAN_F2_Service(Eng_Ver1).pdf - 第24页
Fast & Flexible Chip Shooter DECAN F2 Service Manual iv Safety Precaution Following labels described in each section are atta ched on specific position of this machine. Follow the instructions on each label for opera…
Preface
iii
Caution If remarks following this symbol are not observed,
damageto the machine, embedded program, data, etc. may
occur, or accidents involving personal injury may occur.
Therefore, one must follow the instructions without fail.
Fast & Flexible Chip Shooter DECAN F2 Service Manual
iv
Safety Precaution
Following labels described in each section are attached on specific position of this
machine. Follow the instructions on each label for operating this machine safely. If a label
has come off or has damaged, put a new one on a proper position referring to the following
figures. For ordering a new label or offering any comment, questions, please contact to the
business department or the local agent designated by Samsung Techwin Co., Ltd.
Front of the machine
The following labels are attached to the front of the machine.
Do not tamper with the door key
Do not open the door during operation
Part where this label is attached contains
moving parts, it is very dangerous if the user
open the cover while operating.
Preface
v
As the current with high-voltage flows inside
the cover or in the area near the switch,
take precautions against electric shock. Be
sure to turn off the main switch in the left-
lower cover of the rear side before
maintenance.
Do not remove the safety device. It could
cause personal injuries or serious
problems.
Do not put a hand in during operation
Part where this label is attached contains
moving parts, it is very dangerous if the user
disassembles any part or opens the cover
while operating.
Stop the machine before servicing
Stop the machine before maintenance or
error troubleshooting.