DECAN_F2_Service(Eng_Ver1).pdf - 第26页
Fast & Flexible Chip Shooter DECAN F2 Service Manual vi Rear of the machine The following labels are attached to the front of the machine. Do not t amper with the door key Do not open the door during operation Part…
Preface
v
As the current with high-voltage flows inside
the cover or in the area near the switch,
take precautions against electric shock. Be
sure to turn off the main switch in the left-
lower cover of the rear side before
maintenance.
Do not remove the safety device. It could
cause personal injuries or serious
problems.
Do not put a hand in during operation
Part where this label is attached contains
moving parts, it is very dangerous if the user
disassembles any part or opens the cover
while operating.
Stop the machine before servicing
Stop the machine before maintenance or
error troubleshooting.
Fast & Flexible Chip Shooter DECAN F2 Service Manual
vi
Rear of the machine
The following labels are attached to the front of the machine.
Do not tamper with the door key
Do not open the door during operation
Part where this label is attached contains
moving parts, it is very dangerous if the user
open the cover while operating.
Preface
vii
장비 출하 시 전원은 AC 380V로 설정되어
있습니다 . 장비에 전원을 공급하기 전에 반
드시 공급 전원과 장비의 전원 설정이 올바
른지 확인하십시오 .
Do not open the door during operation
Remove power & air-source only for
authorized personnel.
Do not put a hand in during operation
Part where this label is attached contains
moving parts, it is very dangerous if the user
disassembles any part or opens the cover
while operating.
Stop the machine before servicing
Stop the machine before maintenance or
error troubleshooting.