DECAN_F2_Service(Eng_Ver1).pdf - 第98页

4-10 Fast & Flexible Chip Shooter DECAN F2 Service Manual  Gantry Mapping  ANC, Position T eaching  T otal T ime: 0.8Hour

4-9

X Frame

4.3. Sensor

4.3.1. Required Tools

 T wrench (other tools supplied) or hex wrench

 Gear wrench or torque wrench

4.3.2. Position of Sensor

4.3.3. Sensor Replacement Procedure

1) Manipulate the teaching box to move the X Frame to the front.

2) Close the PC as usual and turn off the main switch at the front of the machine.

3) Disconnect the sensor cable connector.

4) Unscrew the fixing bolts securing the Sensor and remove sensor.

5) Replace the Sensor with a new one.

Ref The part number of the new Sensor is J3212022A.

6) Perform the following calibrations.

Axis Home Calibration

Common X-Y (1'st)

Thermal Mapping

4-10

Fast & Flexible Chip Shooter DECAN F2 Service Manual

Gantry Mapping

ANC, Position Teaching

Total Time: 0.8Hour

Head