DECAN_F2_Service(Eng_Ver1).pdf - 第30页

1-x Fast & Flexible Chip Shooter DECAN F2 Service Manual Operation of the safety interlock This section describes the operation of safety interlocks manipulated to stop the machine immediately under an emergency situ…

Preface

Users of artificial cardiac pacemakers must

not approach the machine

If a failure occurs to an artificial cardiac

pacemaker due to the magnetic force of the

linear motor, the user may be injured or die.

Therefore, do not approach the machine.

Danger of injury due to magnetic force

If a metallic material or ornament sticks to

the machine due to the magnetic force of

the linear motor, a person may be injured.

Therefore, exercise caution.

리니어 스케일에 자석을 붙이지 마십시오

리니어 스케일이 이물질에 오염되지 않도록

청결 상태를 유지해 주십시오 .

1-x

Fast & Flexible Chip Shooter DECAN F2 Service Manual

Operation of the safety interlock

This section describes the operation of safety interlocks manipulated to stop the machine

immediately under an emergency situation or for maintenance purposes.

1) EMG (Emergency Stop) switch

This is an emergency stop switch. Operation of this machine is immediately suspended

if this switch is pressed in case of an emergency.

Supply of all powers except for the power to a computer is ceased. The emergency

stop status can be released by turning the ‘EMG’ switch in the direction of the arrow

and pressing the RESET button.

Warning When the emergency shutdown has been applied, the

power supply to all of the machine’s servo motors is turned

off. However, the power supply to other components and

devices remains turned on. Exercise care when taking

measures against an error for the section to which power is

supplied.

Preface

2) Door Lock switch

If the door is open while this machine is running, the door switch is activated and the

system comes into the emergency stop status. The emergency stop status is released if

the door is closed. In order to resume the operation, press ‘READ’ button on the

operation panel to release the emergency status, then press ‘Start’ button.

Warning If the safety sensor of the door is cancelled arbitrarily, the

machine will not stop even though the door is opened

during operation, which could cause injury. The safety

sensor of the door must not be cancelled arbitrarily.