DECAN_F2_Service(Eng_Ver1).pdf - 第219页

10-5 Y-Axis Frame  X-Xy Compensation  Common X-Y (2'nd)  Thermal Mapping  Gantry Ma pping  ANC, Position T eaching  S/W ABS ST700 Signal Adjustment Program - Homing Setting  Time: 1 hour Ref In the case of th…

10-4

Fast & Flexible Chip Shooter DECAN F2 Service Manual

Use the Y Motor Coil assembly at JIG.

Assemble the Y motor magnet with the PIN being in tight contact with the top

surface of the Y frame.

Ref The part number of the jig used for the Y motor coil is TO04-

000612A.

Caution When assembling the linear scale, exercise care so that

insulation material is not left out.

8) The assembling is performed in the reverse order of disassembling. Turn on the main

switch on the front side of the machine and boot the PC once the assembling is

completed.

9) Perform the following calibrations.

 Axis Home Calibration

 Common X-Y (1'st)

10-5

Y-Axis Frame

 X-Xy Compensation

 Common X-Y (2'nd)

 Thermal Mapping

 Gantry Mapping

 ANC, Position Teaching

 S/W ABS ST700 Signal Adjustment Program - Homing Setting

 Time: 1 hour

Ref In the case of the standard conveyor option, remove the machine from

the in-line system.

When removing the Y1 axis linear motor, remove/ assemble the X-

axis motor.

Remove/assemble the X-axis motor referring to the X-axis Motor

Replacement Procedure (Page 4-1).

10-6

Fast & Flexible Chip Shooter DECAN F2 Service Manual

10.2. Linear Scale

10.2.1. Required Tools

 T Wrench (other tools supplied) or Hex Wrench

 Torque Wrench

 S/W ABS ST700 Signal Adjustment Program

 ABS ST700 Signal Adjustment Program

 CABLE-LINEAR_SCALE_GENDER(AM16-000377A)

 CONVERTER,ELECTRIC-MULTI-1/USB COMBO(EP10-001948)

 SM511_Y_LS_OFFSET_JIG (TO04-000898A)

 0.4mm T Ruler

10.2.2. Location of Linear Scale

10.2.3. Linear Scale Replacement Procedure

1) Manipulate the perform homing of the machine.

2) Close the PC as usual and turn off the main switch at the front of the machine.

3) Remove the Cable that is connected to the Linear Scale.

4) Unscrew the fixing bolts (2-M3*10)securing the Linear Scale using a wrench and

remove it.