DECAN_F2_Service(Eng_Ver1).pdf - 第128页

5-28 Fast & Flexible Chip Shooter DECAN F2 Service Manual 7) Once the assembling is comple ted, turn on the main switch on the front of the machine and boot the PC.

5-27

Head

7) When assembling, refer to the following.

Assemble the pulley to the motor using a jig.

The pulley tightening torque is 7kgf-cm.

8) Once the assembling is completed, turn on the main switch on the front of the machine

and boot the PC.

5.7.3. Belt Replacement Procedure

1) Manipulate the teaching box to move the head module to the front.

2) Close the PC as usual and turn off the main switch at the front of the machine.

3) Remove the connectors connected to motor.

4) Slightly loosen the fixing bolts(2-M4*12) securing the motor and remove the loosened

belt.

5) Replace the belt with a new one.

Ref The part number of the new belt is J6602078A.

6) When assembling, refer to the following.

Belt Tension : 190~220Hz

Measurement : Position

5-28

Fast & Flexible Chip Shooter DECAN F2 Service Manual

7) Once the assembling is completed, turn on the main switch on the front of the machine

and boot the PC.

5-29

Head

5.8. R Axis Motor / Belt / Sensor

5.8.1. Required Tools

 T wrench (other tools supplied) or hex wrench

 Gear wrench or torque wrench

5.8.2. Motor Replacement Procedure

1) Manipulate the teaching box to move the head module to the front.

2) Close the PC as usual and turn off the main switch at the front of the machine.

3) In order to secure the work space, remove the illumination section referring to the

illumination section replacement procedure.

4) Unscrew the fixing bolts(4-M3*6) securing the light cover using a hex wrench and

remove it.

5) Unscrew the fixing bolts(3-M3*6) securing motor plate using a hex wrench and

remove it.