00195982-03_SM_SWS_EN.pdf - 第19页
1 Introduction 1.4 Staff qualifications and training Service Manual SIPLACE Wafer System (SWS) 11/2018 19 1.4 Staff qualifications and training Qualified or adequately trained personnel means that these people are famili…
1 Introduction
1.3 Other instructions
18 Service Manual SIPLACE Wafer System (SWS) 11/2018
1.3.4.5 Dispatching ESD modules
► Always store modules and components in conductive packaging (e.g. metallized plastic bags
or metal sleeves) and dispatch them in conductive packaging.
► If the packaging is not conductive, place the modules in a conductive envelope before pack-
aging. Use conductive expanded rubber, ESD bags, domestic aluminum foil or paper, for
example. NEVER use plastic bags or film.
► If the module has integral batteries, ensure that the conductive packaging does not touch or
short circuit the battery terminals and, if necessary, first cover the terminals with insulating
tape or material.
1.3.5 Validity of document
This document applies to modules of the type SIPLACE wafer system.
The work described in this manual is divided into modules and is largely identical for all modules:
●
If the work required should differ from the standard procedure, this will be indicated with refer-
ence to the delivery state.
●
Diagrams should be seen as examples e.g. a different paint finish does not mean that the fol-
lowing information only applies to the modules shown.
Please read the circuit diagram folder for any electrical checks.
●
SIPLACE CA-Series
1.3.6 Release history
Document
SIPLACE wafer system (SWS)
Service manual
Edition Amendments
06/2009 Initial release
09/2010 Revision and supplements
11/2018 Revision and supplements
1.3.7 SIPLACE on the World Wide Web (WWW)
Log in to our SIPLACE® homepage at http://www.asm-smt.com.
You can choose between the German and English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here you can call
up special information about our placement systems, e.g.
●
technical documentation
●
technical information
●
spare parts lists etc.
Registration for the MySIPLACE user group is very simple:
► At the head of the web site, click on
and then on the Register
link.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password.
1 Introduction
1.4 Staff qualifications and training
Service Manual SIPLACE Wafer System (SWS) 11/2018 19
1.4 Staff qualifications and training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
●
Have received first aid training.
1.5 Abbreviations
Abbreviation Description
CO Component
COT Changeover table
COT-i Changeover table insert
C&P Collect&Place
CPP Collect&Pick&Place head
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
P&P Pick&Place
SC Station computer
SWS SIPLACE wafer system
TH TwinHead
1 Introduction
1.5 Abbreviations
20 Service Manual SIPLACE Wafer System (SWS) 11/2018