00195982-03_SM_SWS_EN.pdf - 第423页

16 Software 16.2 Installation of operating system Service Manual SIPLACE Wafer System (SWS) 11/2018 423 Fig.628: Screen after completion of process ► To prepare the USB stick for ejection, enter the following: sync This…

100%1 / 506
16 Software
16.2 Installation of operating system
422 Service Manual SIPLACE Wafer System (SWS) 11/2018
Fig.625: Entry of launch and password (launch)
► Enter cd /asm to switch over to the system folder of the SWS software.
► Enter the following: ls /media/usbdisk0
Fig.626: Entry of cd/ asm and ls /media/usbdisk0
► The contents of the USB stick will be shown. To save the wafer feeder SW packages on the
USB stick, enter the following:
tar -cvzf /media/usbdisk0/wfBackup.tgz ./wf
Fig.627: Entry of tar -cvzf /media/usbdisk0/wfBackup.tgz ./wf
After the process has been completed, the following will appear on your screen:
16 Software
16.2 Installation of operating system
Service Manual SIPLACE Wafer System (SWS) 11/2018 423
Fig.628: Screen after completion of process
► To prepare the USB stick for ejection, enter the following: sync
This is essential for saving the data on the USB stick!
Fig.629: Entry of sync
► To test whether the backup was really generated, enter the following:
ls -l /media/usbdisk0/wfBackup.tgz
Fig.630: Entry of ls -l /media/usbdisk/wfBackup.tgz
16 Software
16.2 Installation of operating system
424 Service Manual SIPLACE Wafer System (SWS) 11/2018
16.2.1.6 Backup via bug report
Another option for backing up the SWS calibration and product data is to generate a bug report.
However, in this case, the necessary backup files can only be restored by specially trained soft-
ware specialists.
Creating a bug report
► Press the key combination Ctrl+Alt+B.
ð The following window will open:
Fig.631:
► Enter your name at Reporter.
► Describe the problem at Effect.