00195982-03_SM_SWS_EN.pdf - 第453页
16 Software 16.2 Installation of operating system Service Manual SIPLACE Wafer System (SWS) 11/2018 453 Fig.693: Message: exiting the setup tool ► Confirm YES with Enter . ► Restart the application. Setting the network …
16 Software
16.2 Installation of operating system
452 Service Manual SIPLACE Wafer System (SWS) 11/2018
Fig.690: Recognize network interfaces - confirmation menu
► Press ESC.
Fig.691: Networking menu
► Press ESC.
Fig.692: Setup tool menu
► Press ESC.
16 Software
16.2 Installation of operating system
Service Manual SIPLACE Wafer System (SWS) 11/2018 453
Fig.693: Message: exiting the setup tool
► Confirm YES with Enter.
► Restart the application.
Setting the network addresses for the eth0 interface (connection SWS-wafer map
server)
Fig.694: Network overview SWS to wafer map server
The networks SWS => wafer map server and SWS =>station each have their own ethernet hub.
The LAN2 port can be found at the bottom.
16 Software
16.2 Installation of operating system
454 Service Manual SIPLACE Wafer System (SWS) 11/2018
The customer interface is needed, for example, for connecting to a wafer map
server (Kynesis ALPS).
To restore the addresses which were reset during installation of the operating system, proceed as
follows:
► Select "Networking".
Fig.695: Setup tool menu
► Confirm Networking with Enter.
Fig.696: Networking menu
► Confirm Network Interfaces with Enter.
Fig.697: Customer network interface menu
► Confirm Customer Network Interface with Enter.
Enter the addresses you noted before installation of the operating system or ask your admin-
istrator for these.