00195982-03_SM_SWS_EN.pdf - 第430页
16 Software 16.2 Installation of operating system 430 Service Manual SIPLACE Wafer System (SWS) 11/2018 ► In the following window, select Yes and press Enter . Fig.641: It takes about 10 minutes to create a recovery DVD…
16 Software
16.2 Installation of operating system
Service Manual SIPLACE Wafer System (SWS) 11/2018 429
Fig.638:
► Press Enter.
ð The setup tool start window will be shown.
Fig.639:
► Select Software Configuration and press Enter.
► Use the cursor keys to select the function Make System Recovery DVD and press Enter.
Fig.640:
The following window will open. Make sure that there is an empty DVD in the SWS PC.
16 Software
16.2 Installation of operating system
430 Service Manual SIPLACE Wafer System (SWS) 11/2018
► In the following window, select Yes and press Enter.
Fig.641:
It takes about 10 minutes to create a recovery DVD.
Firstly, the data for creating the archive are gathered. During this procedure, the Archived xxx MB
value in the last line of the screen shown below should continue to change.
Fig.642:
After this, the archive generated is written on the DVD. The progress can be followed in the last line
of the screen shown below.
Fig.643:
After completion of the recovery data backup, the following window will appear.
16 Software
16.2 Installation of operating system
Service Manual SIPLACE Wafer System (SWS) 11/2018 431
Fig.644:
► Press the ESC key 3x.
ð The following message will appear:
Fig.645:
► Select Yes and press Enter.
► Remove the written DVD from the BoxPC of the SWS and label it with the SWS serial number
and the date of creation.
ð You should now be back in the start menu of the setup tool (see below).
Fig.646:
► Select Restart Application and press Enter, to restart the GUI or Shutdown to shut down
the system.