00195982-03_SM_SWS_EN.pdf - 第434页

16 Software 16.2 Installation of operating system 434 Service Manual SIPLACE Wafer System (SWS) 11/2018 Fig.651: ► To log in as administrator, press and hold the Ctrl+Shift keys and enter the character string capwd (sta…

100%1 / 506
16 Software
16.2 Installation of operating system
Service Manual SIPLACE Wafer System (SWS) 11/2018 433
Fig.649:
► Enter 3 and press Enter. The system will now reboot in safe mode from the recovery DVD.
In the event of a PC problem, it is advisable to create a new recovery DVD every month so that you
always have the current system status available.
In addition, save the product and calibration data on a USB stick every week and place this with the
SWS.
16.2.1.9 Adding network addresses
The installation of the operating system resets the network address to the default addresses.
It is therefore important to make a note of these addresses, especially the one for the eth0 interface
(customer network interface), before installing the operating system.
► Start the setup tool with Ctrl+Alt+Q.
ð The start screen will appear.
Fig.650:
► Select SetupTool and press Enter.
ð The following login box will appear.
16 Software
16.2 Installation of operating system
434 Service Manual SIPLACE Wafer System (SWS) 11/2018
Fig.651:
► To log in as administrator, press and hold the Ctrl+Shift keys and enter the character string
capwd (stands for CA password).
► Use the cursor keys to select the password line and enter the following character string as
password: wafer4GOD
ð The login line should now look like this:
Fig.652:
► Press Enter.
ð The setup tool start window will be shown.
16 Software
16.2 Installation of operating system
Service Manual SIPLACE Wafer System (SWS) 11/2018 435
Fig.653:
► Select Networking.
► Select Network Interfaces.
Customer network interface
► Select Customer Network Interface.
The eth0 interface will be shown. Make a note of the addresses and the interface names. The cus-
tomer interface is need, for example, for connecting to a wafer map server (Kynesis ALPS).
SWS & station network interface
► Select SWS & Station Network Interface.
●
This shows the eth1 interface, used to connect to the station.
●
This is where the address for the connection to the station is shown, for example. These ad-
dresses are fixed as a default.
Format: 192.168.255.24x
The relevant location is entered for x. At location 2, the SWS therefore has the address
192.168.255.242.
For an overview of the addresses (eth0) for all SWSs at the station, refer to Networking -> Net-
work Addresses.