RS-1_instruction manual.pdf - 第1004页

Part 2 D etaile d Descript ion of E ach Functi on Chapter 12 Handling th e Optional Device s 12 - 120 12.16.5 Operation Options 12.16.5.1 <Action> button of the “Production” tab When you press t he <Action> b…

Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices

12-119

Note 3) If the acquired nozzle is not a manual nozzle, the following message will be

displayed. In this case turn off the machine and try installing the nozzle again.

Also, if the acquired nozzles are different or an error occurs, turn off the machine and

try installing the nozzle again.

6) Other item

When you press the <Head Wait Position> button of the menu item “Move Axis,” the head

moves to the head waiting position.

Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices

12-120

12.16.5 Operation Options

12.16.5.1 <Action> button of the “Production” tab

When you press the <Action> button, the “Production action option setting screen” appears. When

you select [Device enable] – [Head], and then enable the “Manual nozzle” check box, the

“Production action option setting” screen is displayed as shown below. You can set neither the

“Simultaneous Nozzle Change” check box nor “Check nozzle orientation” check box.

Part 2 Detailed Description of Each Function Chapter 12 Handling the Optional Devices

12-121

12.16.5.2 <Others> button of the “Production” tab

When you press the <Others> button, the “Production other options setting screen” appears.

When you select [Device enable] – [Head], and then enable the “Manual nozzle” check box, the

“Production other options setting screen” is displayed as shown below. You cannot set the “When

the nozzle is returned, posture is not detected” check box.