RS-1_instruction manual.pdf - 第140页

Part 1 B asic O peration Chapter 2 Pr oduction 2- 29 Preparation of a c omponent supply device Set an availab l e feeder onto t he fixed bank. After sett ing the feeder , perform t he component p i ck - up position t rac…

Part 1 Basic Operation Chapter 2 Production

2-28

Other adjustments

A board having a notch may cause the PWB sensor to activate incorrectly.

Therefore, enter the PWB transport sensor delay time depending on the size of a notch.

You can change the position of the stopper on the reference rail side ⑩ and that of the PWB

sensor (Y direction) also for an irregularly shaped board.

(1) PWB transport sensor delay time

① Select “Program Editor - PWB data” or select the [Conveyor] command from the

“Machine Setup” menu, and the [Conveyor setup] command.

② Enter the delay time that is appropriate for the length of the notch of a board, or the

length of the notch with a keyboard.

(See Section 8.3.3.1 “PWB Transport.”)

(2) Stopper

If the PWB has a notch, etc. at its front end and the centering of the PWB is unstable, move the

stopper to another position.

See Section 2.7.1.3 “Adjusting the shape clamp reference” for the moving operation.

When the stopper assembly has been moved, reset the “Shape clamp position” in the Machine

setup.

(3) Board sensor

Hold the sensor bracket 1 to move it along the elongate hole in the direction “A.”

Check to see if a board is set with the “Conveyor” menu of the “Manual Control” utility or the

“Transport” menu of “Program Editor.”

A: Length of a notch

You do not have to enter the

delay time if the notch

cannot be located at any

PWB sensor.

①

Part 1 Basic Operation Chapter 2 Production

2-29

Preparation of a component supply device

Set an available feeder onto the fixed bank.

After setting the feeder, perform the component pick-up position tracking operation.

① Select the [Plan support] command form the “Product” menu.

Press the <Feeder Setup> button.

The following “Feeder Setup” screen appears.

Bank type display

The current bank type is displayed.

There are feeders that cannot be used according to

the bank type.

R/E: The RF type and EF type electric feeders can

be used.

RF: The RF type electric feeder can be used.

Part 1 Basic Operation Chapter 2 Production

2-30

② Press the <Pick Trace> button.

The following “Pick position tracking” screen appears.

CAUTION

Before the system opens the “Pick position tracking” screen, the axes

move. Before pressing the <Pick Trace> button, be sure to check to

see if there is no person who is operating the insides of the machine.

In addition, to prevent any damage to your body, never put your hand

into the machine or bring your face or head close to the machine while

the machine is operating.

* See Section 2.14.6 “Tracking a component pick position with a camera” for details of the

pick position tracking function.