RS-1_instruction manual.pdf - 第740页
Part 2 D etaile d Descript ion of E ach Functi on Chapter 8 Machine Set up 8- 32 Head Wait Position After you se lect [Head w ait position] , the follow i ng sc reen appears . 1) Setti ng items No. Item Descripti on 1 Po…
Part 2 Detailed Description of Each Function Chapter 8 Machine Setup
8-31
IC collection belt position
When you select [IC collection belt position], the following screen appears.
(1) Setting items
No.
Item
Description
1 Bank type Bank at which IC collection belt is attached
2
IC Collection Belt Installed Position
(Front/Rear, feeder hole number)
Position at which the IC collection belt is attached
3
IC Collection Belt component
discarding position (X, Y, Z)
Position of the IC collection belt at which a component
is discarded
Set each item by teaching or software keyboard.
When the input focus is located in the “X” or “Y” field, values for the X and Y coordinates are
taught. When the input focus is located in the “Z,” a value for the Z coordinate is taught
CAUTION
- To prevent an accident causing an injury, never put your hand in the
machine or bring your face or head close to the machine while it is
teaching data.
- If you optimize a production program without setting the IC collection
belt position, a feeder may be overlapped with the IC collection belt.
Part 2 Detailed Description of Each Function Chapter 8 Machine Setup
8-32
Head Wait Position
After you select [Head wait position], the following screen appears.
1) Setting items
No.
Item
Description
1
Position for front-side operation
X and Y positions
2 Position for rear-side operation X and Y positions
3
ATC Operation Position
X and Y positions
4 Position for production X and Y positions
5
When removing nozzles
X, Y positioning
6
When pausing to protect components
X, Y and Z positions
2) How to set
1) Enter each value in the text box for each of X, Y and Z.
2) Enter each data by teaching. In this case, regardless of which field the input focus is
located in, “X” or “Y,” coordinates are entered in both fields at the same time.
3) To teach the Z coordinate, the input focus should be located in the “Z” field.
CAUTION
To avoid a risk of injury, do not place your hand in the machine, nor
move your face or head close to the machine during while the machine
is teaching data.
Part 2 Detailed Description of Each Function Chapter 8 Machine Setup
8-33
MTS position offset
After you select [MTS position offset], the following screen appears.
Perform an MTS position offset setting.
Set mark position 1/2 of the tray.
(1) Setting item
1) Mark position correction
The mark position correcting function obtains an offset in the horizontal direction
(X, Y) to the design origin of the MTS band mark and corrects the pick coordinates of
the production program at component pick operation.
TR5S/TR5D/TR8SR
<Top surface drawing>
MTS
Front<--->Rear
First mark
Second mark
Mark position correction