RS-1_instruction manual.pdf - 第837页
Pa r t 2 Det ai l ed Des c r i pti on o f Ea c h Fu nc ti on Chapter 10 M ach i ne Manage m e nt Infor m ation 10 - 24 (1) V acuum Pu m p / Ej ector op erati on inf orm at i on No Item Conte nts 1 O perat ing hour s T ot…
Part 2 Detailed Description of Each Function Chapter 10 Machine Management Information
10-23
10.3.8 Vacuum pump/Ejector operation information
When you select [Machine] – [Vacuum pump/Ejector operation information] in the main menu, the
vacuum pump/Ejector operation information screen appears.
・In case of Vacuum pump
・In case of Ejector
Part 2 Detailed Description of Each Function Chapter 10 Machine Management Information
10-24
(1) Vacuum Pump/Ejector operation information
No
Item
Contents
1 Operating hours Total number of hours in which the vacuum pump/Ejector was
used
(2) <Reset> button
When you press the <Reset> button or press [Initialize] – [Reset] in the main menu, the
following question message is displayed.
- Press <OK> in the question message to reset designated items and close the screen.
- When you press the <CANCEL> button, the system does not reset any data and the
current data is still displayed.
Part 2 Detailed Description of Each Function Chapter 10 Machine Management Information
10-25
10.3.9 ATC operation information
When you select [Machine] – [ATC operation information] in the main menu, the ATC operation
information screen appears.
(1) ATC
No. Item Description
1 Nozzle replacement count Displays how many times a nozzle was replaced with
another one per cylinder.
2 Side plate open/shut
count
Displays how many times the slide plate opened/shut
totally.