RS-1_instruction manual.pdf - 第608页
Part 1 B asic O peration Chapter 4 Cr eating a Produc tion Progra m 4- 273 ⑦ E lement editing (gen eral - purpose vi sion compone nt (lead/outline)) Addition, deletion, and recogn ition order f or multiple elem ent group…
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-272
b) For lead/land setting
A component part is automatically detected and the inclination is corrected. At this time,
set the detecting method and the detecting angle.
Detecting method
Explanation
Center of circumscription
The component is scanned from the outside and the center of
circumscription of the bright portion is automatically detected.
Center of lead column
The center of lead column is automatically detected.
Center of 2 lead columns
Each mid-point of 2 lead columns is automatically detected and the
center of the 2 mid-points is specified as the center of the component.
2 corners
Two corners are automatically detected and the mid-point of the 2
corners is specified as the center of the component.
Optional 1 point
The user specifies the center of the component directly.
Optional 2 points
The center of the optional 2 points specified by user is specified as the
center of the component.
⑥ Pole area setting (general-purpose vision component (pole/land)
The window cursor corresponding to the outline of the component is displayed.
Perform teaching for the window so that the only the electrode of the same diameter may be
included in the window.
When you press the <Add> button, the window cursor corresponding to the outline of the
component is displayed. Then, set the area.
When you press the <End Teaching> button, the addition of area is finished.
It is necessary to set at least one pole area.
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-273
⑦ Element editing (general-purpose vision component (lead/outline))
Addition, deletion, and recognition order for multiple element groups are performed. In
addition, a recognition test can also be made.
In the initial status of element editing, the element setting screen appears automatically.
a) To add a new element group, press the <Add> button.
Set the type and angle of the element to be added and then add the element group. When
you press the detailed setting button, a detailed setting dialog is displayed to perform
settings more finely.
b) To delete an existing element group, select the element group to be deleted and press the
<Delete> button.
c) To test whether an element can be recognized according to the settings of the current
element group, press the <Recognition test> button.
d) To change the element group recognition order, check off "Specify the element recognition
order manually."
e) To change the recognition order, select the element group to be changed and press the
Up/Down button of "Recognition order shift." The element group position is shifted up and
down.
f) After completing editing all the element groups, press the <End Teaching> button.
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-274
Element type Explanation
Lead Element group data consisting of leads is created.
Side Element group data consisting of sides is created.
Corner Element group data consisting of corners is created.
Mark Element group data consisting of marks is created.
Center of gravity Element group data consisting of center of gravity for rough positioning is
created.
User definition Element groups consisting of image data for direction inspection are created.
- When the element type is “Lead,” “Side,” “Corner,” “Mark” or “Center of gravity”
See Chapter 6 “General-Purpose Vision Component” for details of the settings.