RS-1_instruction manual.pdf - 第572页
Part 1 B asic O peration Chapter 4 Cr eating a Produc tion Progra m 4- 237 (6) Continuous meas urement The system m easures a l l compo nents you spe cified. 1) Setting the con ditions for continuous measur ement When yo…
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-236
3) Result of measurement of the current component
When the system finishes measuring the current component, the following result screen
appears.
① Component to be measured
Information on the measured component and its pick-up position are displayed here.
② Result of measurement
The values of the component set before measurement and those after measurement are
displayed here. “***” appears in the field of each of the items not measured.
● String art
This button shows the string art based on the results of the SWEEP operation obtained
during measurement.
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-237
(6) Continuous measurement
The system measures all components you specified.
1) Setting the conditions for continuous measurement
When you select the [Machine operation] command from the Program Editor menu, and
then the [All component] command, the following screen appears.
① Component
To measure only components that satisfy the certain conditions among components
specified in the Component data, select the button(s) corresponding to the desired
condition(s), and then set the details.
Condition Overview
All components Measures all Component data.
Thin components Measures only components whose height is the specified value or lower.
Specific component types Measures the specified component type(s) only.
Specific nozzle Number Measures only components that use the specified nozzle.
To specify the range of component numbers to further select components among those
which already satisfy the conditions specified with the buttons above, check off the check
box “Range of inspection” and then specify the range of components to be measured.
Menu item Overview
Start comp. No.(Start component No.) Check off this check box to specify the component data number of
the first component to be measured.。
End comp. No. (End component No.)
Check off this check box to specify the component data number of
the last component to be measured.
Only placement comp.
(Only placement components)
Check off this check box if only components specified in Placement
data are to be measured.
② Measure item
Select the item(s) to be measured. By default, all available items are selected.
The items that can be measured vary depending on the component types.
Part 1 Basic Operation Chapter 4 Creating a Production Program
4-238
③ Component return setting
Select how to handle an extremely small component whose dimension is 1 mm or less after
the system measures it.
Menu item Overview
Returns every time The system returns a component to its original position every time the system finishes
measuring it.
Throw away every time The system discards a component every time the system finishes measuring it.
Inquires every time The system asks you how to handle a component every time the system finishes measuring it.
④ <Continuous MEAS.> button
This button starts continuous measurement of components.
⑤ <Exit> button
This button switches the screen back to the previous screen.
2) Screen displayed during continuous measurement
(“Continuous component measurement is being executed” screen)
The dialog box like the one shown below appears during continuous measurement, and it
shows that the processing being executed is updated sequentially.
a) Progress situation
The progress bar indicates the current progress situation.
To forcibly abort the current continuous measurement operation, press the <STOP> switch.
The following dialog box appears on the screen. Select whether to abort the measurement
operation or not.