RS-1_instruction manual.pdf - 第805页

Part 2 D etaile d Descript ion of E ach Functi on Chapter 9 M anual Control 9- 33 9.6.3 Other control When you se lect [Other ] – [Other control ] in the m enu, t he other contr ol dialog appe ars. (1) Calibration bl ock…

Part 2 Detailed Description of Each Function Chapter 9 Manual Control

9-32

9.6.2 Signal light control

When you select [Other] – [Signal light control] in the menu, the “Signal light control” dialog

appears.

(1) Status

The status of each unit is displayed at completion of control.

(2) Control item

Select a control item by radio button. “Mini signal light” cannot be selected unless it is

checked off in the option settings of the MS parameters.

This has no effect on the setting in “Device enable” in Machine setup.

1) Red/Yellow/Green

The light ON/Light Off/BLINK of each color of the signal light is controlled.

Select <Light On> button, <Light Off> button, <Light On/Off> button, or <BLINK> button

for control.

2) Buzzer

The ON/OFF operation of the buzzer is controlled.

Press the <ON> button, <OFF> button, or <ON/OFF> button for control.

3) Mini signal light (front/rear)

The light ON/light OFF operation of each mini signal light is controlled.

Select <Light On> button, <Light Off> button, or <Light On/Off> button for control.

Part 2 Detailed Description of Each Function Chapter 9 Manual Control

9-33

9.6.3 Other control

When you select [Other] – [Other control] in the menu, the other control dialog appears.

(1) Calibration block

Select a control item by radio button and press the <ON> button, <OFF> button, or

<ON/OFF> button on the “Calibration block” side for control.

1) LED control

The LED ON/OFF operation is controlled.

2) Vacuum control

The vacuum ON/OFF operation is controlled.

(2) Vacuum pump

Press the <ON> button, <OFF> button, or <ON/OFF> button on the “Vacuum pump”

“Ejector” side for control.

Part 2 Detailed Description of Each Function Chapter 9 Manual Control

9-34

9.6.4 Other sensors

When you select [Other] – [Other sensor] in the menu, the other sensor dialog appears.

The status of each sensor is displayed.

This has no effect on the setting in “Device enable” in Machine setup.

(The status of a sensor that is not checked off (not used) is also displayed.)

In the sensor status display, the status is read and displayed continuously.