RS-1_instruction manual.pdf - 第5页

iii Matters of C aution at Ea ch of Its Use St ages Application 1. Never use t his mach ine for p urpose s other t han its orig inal ap plication. Our company will n ot be res ponsible in the case of its use for other ap…

Basic Matters of Precaution

1. Be sure to read all documents included in this Manual and the attached booklet before using this machine.

Also, keep this Manual carefully so as to be able to read it whenever necessary.

2. Contents of this Manual include items that are not included in specifications of the machine purchased.

3. The machine should be operated only by the operator who has learned how to run it.

4. Regarding the repair or maintenance (excluding daily inspection and other matters specified in the Manual),

ask our company or its agent to do it.

5. General maintenance, inspection, and repair (matters specified in this Manual) shall be conducted only by

specialized maintenance engineers who have finished the maintenance course specified by our company.

With regard to repair (matters specified in this Manual), use genuine parts of our company.

Safety Equipment, Alarm Label

1. In order to prevent accidents due to nonpresence of safety equipment, start to operate this machine only after

confirming that the equipment is suitably installed at the specified position.

2. If the safety equipment is dismantled, be sure to attach it to its original position, and confirm that it operates

normally.

3. Make sure that the warning label stuck to the machine will be always clearly visible. If it has been peeled off or

stained, order new labels from our company and exchange old labels with new ones.

4. If the safety equipment is damaged, remove it. Never operate the machine.

If you operate the machine without the safety equipment, it may lead to severe accidents involving serious

personal injuries or even death.

[Where to stick warning labels]

【Coplanarity】

Caution sticker for

avoiding injuries of

fingers

Laser radiation port

caution sticker

CAUTION

Warning sticker for

hazardous voltage

[Noise filter]

[Breaker]

Warning sticker for

hazardous voltage

Caution sticker for

not touching with a

finger

Laser Class 3B

Caution sticker (When

an coplanarity option is

used)

Sticker for no load

(Supplied with the EN

machine only)

Warning sticker for

hazardous voltage

Caution sticker for an injury to

fingers (when a feeder

exchange trolley is used)

iii

Matters of Caution at Each of Its Use Stages

Application

1. Never use this machine for purposes other than its original application.

Our company will not be responsible in the case of its use for other application.

2. Do not remodel this machine. Our company will not be responsible for any accident arising as a result of its

remodeling.

Operational Training

1. To prevent accidents due to unaccustomed handling, operation of this machine must be limited to operators

who have participated in the operation training specified by our company and have appropriate knowledge and

operating skills.

Transport

1. When lifting the machine or moving it, take sufficient safety measures so that no dropping accidents will occur.

2. Keep the following environment when transportation or storage.

Environment requirements Temperature : -15℃ to 70℃

Humidity : 20％ to 95％RH (No condensation)

Unpacking

1. Read all instructions shown on the transport-use container.

2. Never cut tapes with a cutter.

3. Retain delivery-use materials.

Installation

1. Lower the height adjuster surely to prevent an accident due to a sudden movement of the machine being in

operation.

2. To prevent the occurrence of any accident due to unintended moving of the machine in operation, make

casters float using a height adjuster.

3. Install this machine at a flat position.

4. To prevent the occurrence of electric shock, power leakage, or fires, use attached products regarding cables,

and link them to the specified positions.

5. To prevent electric shock, power leakage, or fires, make sure that irrational force will be applied to the cables

while the machine is in operation.

6. Securely fix the power supply plug and the connector of an I/F cable. When drawing out the power supply

plug or the I/F cable, do it by holding the connector unit.

7. Set up a mounter in premises with the supply current capacity of 100A or more per phase.

Before Operation

1. To prevent accidents to human bodies, make sure before supplying power that there is no damage, coming off

of parts, or loosening of connectors and cables.

2. To prevent bodily accidents, never put in your hand into the driving unit.

Greasing

1. Use the grease designated by JUKI only.

2. To prevent the occurrence of an inflammation or rash, immediately wash the related portions if grease adheres

to your eyes or other parts of your body.

3. If grease is mistakenly swallowed, immediately consult a physician to prevent diarrhea or vomiting.

Maintenance

1. To prevent accidents due to unaccustomedness, repair and adjustment shall be conducted by maintenance

engineers who are versed in the machine. In replacing parts, use genuine parts of our company. We will not

assume any responsibility for an accident due to the use of non-genuine parts.

2. To prevent accidents or electric shock due to unaccustomedness, entrust electrical repair or maintenance

work (including wiring work) to persons versed in electricity, or ask engineers of our company or its sales

company to do it.

3. To prevent accidents due to unintended start-up of the machine, conduct repair or adjustment only after

removing air supply pipes and discharging residual air.

4. To prevent bodily accidents, confirm after such work as repair, adjustment, or parts replacement that no

screws or nuts are loosened.

CAUTION

Matters of Caution at Each of Its Use Stages

Use Environment

1. Use the machine in the environment free from effects of noise sources (magnetic waves), such as

high-frequency welders, in order to prevent accidents due to erroneous actions.

2. In order to prevent accidents due to erroneous actions, use the machine in the environment where the source

voltage is within the power supply ±10%.

3. In order to prevent accidents due to erroneous actions, do not use the machine in the environment where the

supplied air pressure is 0.5±0.05MPa.

4. To ensure safety, use the machine under the following environment:

Environment requirements during operation Temperature : 10℃ to 35℃

Humidity : 50％ RH or less (No condensation)

Altitude : 1,000m or less

5. To prevent accidents due to breakdown of electric/electronic parts, turn on power supply sufficiently after the

fear of dew condensation is eliminated, because such condensation may occur when the machine is rapidly

moved from a cold place to a warm location.

6. To prevent accidents due to breakdown of electric/electronic parts, stop the use of the machine during

lightning, and draw out the power supply plug.

7. The communication radio wave specification of a nozzle RFID reader (optional) varies depending on its

destination.

Never use it in any area other than the regulated one because such use of the reader violates the radio

wave law.

Nozzle RFID readers for an RS-1R are designed for the following destinations.

- 40214759 NOZZLE RFID READER_ASM_Japan (for Japan)

- 40218744 NOZZLE RFID READER_ASM_China (for China)

- 40218745 NOZZLE RFID READER_ASM_USA (for the U.S.A.)

- 40218746 NOZZLE RFID READER_ASM_Europe (for the EU)

CAUTION